ASSEMBLY
the spanner in the opposite direction to the direction
•
Turn the blade shaft until one of the holes in the drive
of rotation (Caution! left-hand thread).
disc aligns with the corresponding hole in the gear
housing.
•
•
Insert the locking pin (C) in the hole to lock the shaft.
To fit the trimmer head, first separate the two halves
(see diagram). Proceed as follows:
•
Insert a finger into the centre hole of the cover (I) while
grasping the cover with your other fingers. Using the
index finger and thumb of your other hand, release the
two catches (J) that engage in the cut-outs in the
bottom half (K). Pull apart the trimmer head, grasping
the cover firmly.
•
•
Place the cover (I) and the support flange (F) on the
output shaft.
•
When loosening and tightening the saw blade nut,
there is a risk of injury from the teeth of the saw blade.
You should therefore always ensure that your hand is
shielded by the blade guard when doing this. Always
use a socket spanner with a shaft that is long enough
to allow this.The arrow in the diagram shows the area
where you should operate the socket spanner when
loosening or tightening the nut.
Fit the nut (G).Tighten the nut to a torque of 35-50 Nm
(3.5-5 kpm). Use the socket spanner in the tool kit.
Grasp the handle of the spanner as close to the
trimmer guard as possible.To tighten the nut, turn the
spanner in the opposite direction to the direction of
rotation (Caution! left-hand thread).
Fitting a trimmer guard and
Superauto II 1" trimmer head
(232R)
•
Fit the bottom half of the trimmer head (K) to the cover
(I) by pressing them together, with the cut-outs on the
bottom half aligned with the catches on the cover.
K
G
F
I
B
C
K
M
J
L
I
•
To dismantle, follow the instructions in the reverse
order.
A
•
•
Fit the correct trimmer guard (A) for use with the
trimmer head. Secure the trimmer guard using the 4
screws (L) and the support plate (M) as shown.
Fit the drive disc (B) on the output shaft.
English – 17
Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
---|---|
Tags | Husqvarna 232R, Husqvarna 235FR, Husqvarna 235R |
Model Year | 2008, 2009, 2010 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Husqvarna, Chainsaw |
Document File Type | |
Publisher | husqvarna.com |
Wikipedia's Page | Husqvarna |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)