Controls System
Maintenance
Adjusting the Traction Control
If traction control does not engage or it slips during
operation, an adjustment is required.
1.
2.
Move traction control to Disengaged position.
Figure 46
To increase cable tension, loosen front cable jam
nut and tighten back cable jam nut (Figure 45) until
a force of 12-16 lb. is required to engage traction
control.
1.
Reel control cable
3.
Tighten front cable jam nut.
Check control operation.
4.
Measure the force at the control knob.
Figure 45
1.
Traction cable
2.
Service/parking brake
cable
3.
4.
Tighten front cable jam nut.
Check control operation.
Adjusting the Reel Control
If reel control does not engage or it slips during
operation, an adjustment is required.
1.
Make sure traction control is properly adjusted; refer
to Adjusting the Traction Control.
2.
To increase cable tension, loosen front cable jam nut
and tighten back cable jam nut (Figure 46) (located
on top of gear box) until the reel cable force adds 7
to 10 lbs. of additional handle force measured at the
control knob.
Note: If traction control handle force is 12 lbs., the
combined traction and reel force should be 19 to
22
lbs.
30
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro 04030, Toro 04031, Toro 04202, Toro 04206, Toro Greensmaster |
Model Number | 04030, 04206, 04031, 04202 |
Model Year | 2008 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 280000001-280999999 |
Product Name | Toro Greensmaster Flex 18 Mower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Product Type | Walk Behind Mower |
Product Series | Toro Greensmaster - Flex Series |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)