Toro CCR 6053 Quick Clear 38576 38577 Snow Blower Operators Manual, 2008

7.
Install the curved washer and the rotor pulley bolt
and tighten them securely (Figure 36).
Note: The concave side of the curved washer goes
against the outside of the pulley.
8.
9.
Install the brake spring onto the idler arm (Figure 37).
Install the drive belt cover with the bolts you
removed in step 1.
Note: Ensure that the drive belt is properly adjusted
and operating; refer to Checking the Control Cable
and Adjusting the Control Cable.
Adjusting the Quick Shoot™
Control
Figure 36
1.
2.
Drive belt cover
Bolt (3)
6.
7.
Drive belt
Rotor shaft
If there is more than 1/2 inch (13 mm) of slack in the
Quick Shoot cable (Figure 38) or the discharge chute
does not rotate left and right in equal angles, adjust the
Quick Shoot control cables.
3.
Rotor pulley bolt
8.
Brake spring (unhook from
idler arm here)
4.
5.
Curved washer
Rotor pulley
9.
Idler pulley
10.
Engine pulley
2.
Unhook the brake spring from the idler arm to
release the belt tension (Figure 36).
3.
4.
5.
Remove the screw and curved washer that holds the
rotor pulley (Figure 36).
Remove the rotor pulley and  the drive belt
(Figure 36).
Install the new drive belt, routing it as shown in
(Figure 37).
Figure 38
1.
1/2 inch (13 mm) maximum slack
1.
Loosen the two Quick Shoot control cable clamps
(Figure 39).
Figure 37
1.
Brake spring (install on
idler arm here)
3.
4.
Engine pulley
Rotor pulley
2.
Idler pulley
Note: Route the new drive belt first around the
engine pulley, then the idler pulley, and finally around
the loose rotor pulley positioned just above the rotor
shaft (Figure 36).
Figure 39
1.
Cable clamps
6.
Install the rotor pulley onto  the rotor shaft
(Figure 36).
16
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOperator's Manual
LanguageČeský jazyk, English, Italiano
Serial Number280000001 - 280999999
Product NameToro CCR 6053 Quick Clear Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesPower Clear, Snowthrower
Swath21 inch
DischargeSingle Stage
Engine ManufacturerTecumseh
Engine Oil Type21 oz. (.62l) 5w-30 or 10w / API SH or higher
Engine Motor Model #OH195SA-72567G
Engine Motor Size195cc
Engine Motor Type4 Cycle
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website