8.
Set the gap on the plug to 0.030 inch (0.76 mm)
(Figure 31).
Figure 31
1.
Center electrode insulator
Side electrode
3. Air gap (not to scale)
2.
9.
Install the spark plug and tighten the plug securely.
Connect the wire to the spark plug.
10.
11.
Tip the snowthrower forward onto its front to make
installing the exhaust baffle easier (Figure 32).
Figure 29
1.
Exhaust baffle
5.
Disconnect the wire from the spark plug (Figure 30).
Figure 32
12.
From the rear left position, insert the exhaust baffle
up into the shroud.
Note: Ensure that the upper lip of the exhaust
baffle fits into the tabs on the inside of the shroud
(Figure 33).
Figure 30
1.
Spark-plug wire
6.
Clean around the spark plug.
7.
Remove the spark plug from the cylinder head.
Important: Replace a cracked, fouled, or
dirty spark plug. Do not clean the electrodes
because grit entering the cylinder can damage
the engine.
14
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38585 |
Model Number | 38585 |
Model Year | 2008 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 280000001 - 280999999 |
Product Name | Toro Power Clear Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Series | Power Clear, Snowthrower |
Swath | 21 inch |
Discharge | Single Stage |
Engine Manufacturer | Tecumseh |
Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
Engine Motor Model # | LH195SP-67529D |
Engine Motor Size | 5.5 hp |
Engine Motor Type | 4 Cycle CARB3, EPA2 |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)