McCulloch Mac 3 14XT 4 18XT 4 20XT Chainsaw Owners Manual

S  Keep a good, firm grip on the saw with both
hands when the engine is running and don’t
let go. A firm grip will help you reduce kick-
back and maintain control of the saw.  Keep
the fingers of  your left hand encircling and
your left  thumb under  the front handlebar.
Keep your right hand completely around the
rear handlewhether your arerighthandedor
left handed. Keep your left arm straight with
the elbow locked.
S  Low--Kickback  Chain,  designed  with  a
contoured  depth  gauge and  guard  link
which  deflect kickback  force  and  allow
wood to gradually ride into the cutter.
Low-Kickback Chain
Contoured Depth Gauge
Elongated Guard Link
Deflects Kickback
Force And Allows
Wood To Gradually
Ride Into Cutter
S  Handguard, designed to reduce the chance
of your left hand contacting the chain if your
hand slips off the front handlebar.
S  Position of front and rear handlebars, de-
signedwithdistancebetweenhandlesand
“in-line” with each other.  The spread and
“in-line” position of the hands provided by
this design work together to give balance
and resistance in  controlling the pivot  of
the saw back toward the operator if kick-
back occurs.
S  Position your lefthand onthe fronthandle-
bar so it is in a straight line with your right
hand  on the  rear  handle  when making
bucking cuts. Never reverse right and left
hand positions for any type of cutting.
S  Standwithyourweightevenly  balancedon
both feet.
S  Stand slightly to the left side of the saw to
keep your body from being in a direct line
with the cutting chain.
S  Do not overreach.  You could be drawn or
thrown off balance  and lose control  of the
saw.
S  Donotcutaboveshoulderheight.    Itisdiffi-
cult  to  maintain  control  of  saw  above
shoulder height.
WARNING
: DO  NOT RELY UPON
ANY OFTHE DEVICES BUILTINTOYOUR
KICKBACK SAFETY FEATURES
SAW.
YOU  SHOULD  USE  THE  SAW
PROPERLY AND CAREFULLY TO AVOID
KICKBACK. Reduced--kickback guide bars
and low--kickback  saw  chains reduce  the
chance and magnitude of kickback and are
recommended.Your saw has alowkickback
WARNING:Thefollowingfeaturesare
includedonyoursawtohelpreducethehazard
ofkickback; however, such features will notto-
tally eliminate this  dangerous reaction.  As a
chain saw user, do not rely only on safety de-
vices.  You must follow all safety precautions,
instructions,andmaintenanceinthis   manualto
help avoid  kickback and  other forces  which
can result in serious injury.
chain and  bar as original  equipment.
Re-
pairs onachainbrakeshould  bemade  by an
authorizedservicingdealer.Takeyour   unitto
the place of  purchase if purchased from  a
servicingdealer,or  tothenearestauthorized
master service dealer.
S  Reduced--Kickback  Guide  Bar,  designed
withasmallradiustipwhichreduces    thesize
ofthekickbackdangerzoneonthebartip.     A
Reduced--Kickback  Guide  Bar  has  been
demonstrated  to  significantly   reduce  the
S
Tip contact in some  cases may cause  a
lightning fast reverse REACTION, kicking
theguidebar  upandbacktowardtheoper-
ator.
Pinchingthesaw  chainalongthetopofthe
guide bar may push the guide bar rapidly
back toward the operator.
number and seriousness of kickbacks.
S
Reduced Kickback
Symmetrical
Guide Bar
S  Either ofthesereactions maycauseyouto
lose control of the saw which could result
in serious injury.  Do  not rely exclusively
uponthesafetydevices  builtintoyoursaw.
Small Radius Tip
Symmetrical Guide Bar
Large Radius Tip
ASSEMBLY
Protective gloves (not  provided) should be
worn during assembly.
ATTACHING THE BUMPER SPIKE
(If not already attached)
The bumper spike may be  used as a pivot
when making a cut.
1.
Loosenandremovethechainbrakenuts
and the chain brake from the saw.
Attach the  bumper  spike with  the two
screws as illustrated.
2.
6
Product Specification
CategoriesChainsaw Manuals, McCulloch Chainsaw Manuals
Tags, , , , ,
Model Year2009, 2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 15 pages
LanguageEnglish
Product BrandMcCulloch. Support Phone for US: Wheeled (Mowers, Tractors, Tillers, Snow Throwers) - 1-800-849-1297
McCulloch Handheld (Chainsaws, Trimmers, Blowers, Edgers) - 1-800-554-6723 All McCulloch Products - 1-800-521-8559, Chainsaw
Document File TypePDF
Publishermcculloch.com
Wikipedia's PageMcCulloch Motors
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website