2009 Poulan Pro PP4218AV Chainsaw Owners Manual

NOTE:
If this saw is to be used for com-
SPECIAL NOTICE: Your saw is equipped
mercial logging,  a chain  brake is  required
and shall not be removed or otherwise dis-
abled tocomply withFederal OSHA Regula-
tions for Commercial Logging.
with a temperature limiting  muffler and spark
the
requirements  of California  Codes 4442  and
All U.S. forest  land and the states  of
arresting
screen
which
meets
4443.
California,  Idaho,   Maine,  Minnesota,   New
Jersey, Oregon,  and Washington  require by
law that many internal combustion engines to
be equipped with a spark arresting screen.  If
you operate a chain  saw in a state or locale
where such regulations  exist, you are legally
for   maintaining  the   operating
WARNING:
The engine  exhaust
from this product contains chemicals known
to the State  of California to  cause cancer,
birth defects or other reproductive harm.
SAFETY NOTICE: Exposure to vibrations
through prolonged  use of  gasoline powered
hand tools could cause blood vessel or nerve
damage in  the fingers,  hands, and  joints of
responsible
condition of these parts.  Failure to do so is a
violation of  the law.   Refer to  the SERVICE
section for maintenance of the spark arresting
screen. Failure to follow all Safety  Rules and
Precautions  can  result  in  serious  injury.  If
situations occur which are not covered in this
manual, use care and good judgement. If you
need  assistance,   contact  your   authorized
service dealer or call 1-800--554--6723.
people
prone   to  circulation   disorders   or
abnormal  swellings.  Prolonged use  in  cold
weather  has  been  linked  to   blood vessel
damage
in   otherwise   healthy  people.   If
symptoms  occur such  as  numbness,  pain,
loss ofstrength,changeinskincolor   ortexture,
or loss offeeling inthe fingers,hands, or joints,
discontinue  the  use  of this  tool  and  seek
medical  attention.  An  anti-vibration  system
does not  guarantee the  avoidance of  these
problems. Users who operate power tools on
a  continual and  regular basis  must  monitor
STANDARDS: This saw is listed by Under-
writer’s Laboratories, Inc., in accordance with:
B175.1--2000   American   National
for   Gasoline--Powered  Chain
ANSI
Standards
Saws -- Safety Requirements
CSA Z62.1--03 Chain Saws -- Occupational
Health and Safety
closely
their   physical   condition   and  the
condition of this tool.
CSA Z62.3--96 Chain Saw Kickback Occu-
pational Health and Safety
ASSEMBLY
Protective gloves (not  provided) should be
worn during assembly.
3.
An adjusting pin and screw is used to ad-
just the tension of the chain. It is very im-
portant when assembling the bar, that the
pin located on the adjusting screw aligns
intoaholeinthebar.Turningthescrewwill
move the adjustment pin up and down the
screw. Locate this adjustment before you
begin mounting the bar onto the saw. See
following illustration.
ATTACHINGTHEBAR&CHAIN   (Ifnot
already attached)
WARNING:
If received assembled,
repeat all steps to ensure your saw is properly
assembled and all fasteners  are secure.  Al-
ways wear  gloves when handling  the chain.
Thechainis  sharp andcan cutyou evenwhen
it is not moving!
Inside
view of
clutch
cover
1.
Loosenandremovethebar   nuts andthe
clutch cover from the saw.
Remove the plastic shipping  spacer (if
present).
2.
Adjustment located on clutch cover
4.
Turn the adjusting screw by hand coun-
terclockwise until the adjusting pin  just
touches the stop. This should allow the
pin to be near the correct position.
Slide guide bar on bar bolts until guide bar
stops against clutch drum sprocket.
Clutch cover
5.
Bar nuts
Location of
shipping
spacer
Chain adjustment tool
(Bar Tool)
6
Product Specification
CategoriesChainsaw Manuals, Poulan Pro Chainsaw Manuals
Tags
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website