4.
5.
6.
Hold the rotor and pull out the rotor shaft.
Remove the rotor.
Align the left side of the new rotor with the coupler.
Note: The 3 bosses on the rotor end must align with
the slots on the coupler (Figure 17).
Figure18
1.
Idlerspring
2.
Idlerarm
4.
Rotate the rotor with your left hand while sliding the
belt off the large pulley with your right hand (Figure 19).
Figure17
1.
2.
Coupler
Boss
3.
4.
Slot
Drivehex
Note: When mounting the coupler to the drive hex,
align the coupler tabs to the inside.
7.
8.
Slide the right side of the rotor into the mounting
position.
Insert the rotor shaft through the rotor and ensure that
the shaft fits into the bearing on the right side.
Figure19
1.
Largepulley
2.
Belt
9.
Torque it to at least 10 ft-lb (14 N⋅m).
5.
Slip the new belt over the small pulley (Figure 20).
10.
Install the cover and the skid.
ReplacingtheLargeBelt
1.
Remove the 3 screws that secure the left side plate to
the snowthrower frame (Figure 15).
2.
Remove the side plate and the skid.
The idler spring could fly in your face while you
remove it, causing personal injury.
Figure20
Wear safety goggles when working with the idler
spring.
1.
2.
Idlerarm
Idlerpulley
3.
Smallpulley
6.
7.
Lift up the idler arm and slip the belt under the idler
pulley (Figure 20).
3.
Remove the idler spring from the idler arm (Figure 18).
Rotate the rotor with your left hand while sliding the
belt onto the large pulley with your right hand (Figure
21).
9
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38026 |
| Model Number | 38026 |
| Model Year | 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 290000001 - 290001000 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 7.3 amp |
| Engine Motor Type | 230 VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)