Location of shipping spacer
Cutters
Depth Gauge
Drive Links
7.
Place the chain over and behind the
clutch, fitting the drive links in the clutch
drum sprocket.
Chain Brake
Nuts
Chain Brake
Bar Tool
3.
An adjusting pin and screw is used to ad-
just the tension of the chain. It is very im-
portant when assembling the bar, that the
pin located on the adjusting screw aligns
intoaholein thebar. Turningthe screw will
move the adjustment pin up and down the
screw. Locate this adjustment before you
begin mounting the bar onto the saw. See
illustration below.
Place chain onto the sprocket
8.
9.
Fit bottom of drive links between the
teeth in the sprocket in the nose of the
guide bar.
Fit chain drive links in bar groove.
10.
Pull the bar forward until the chain is
snug in theguide bar groove. Ensureall
drive links are in the bar groove.
11.
Now, install chain brake making surethe
adjusting pin is positioned in the lower
hole inthe guidebar. Remember this pin
moves the bar forward and backward as
the screw is turned.
Installchainbrakenutsandfingertighten
only. Once the chain is tensioned, you
will need to tighten chain brake nuts.
Inside view of
Chain Brake
12.
Adjustment located on Chain Brake
4. Turn the adjusting screw by hand counter-
CHAIN TENSION (Including units with
chain already installed)
NOTE: When adjusting chain tension,
make sure the chain brake nuts are finger
tight only. Attempting to tension the chain
when the chain brake nuts are tight can
cause damage.
clockwise
until
the adjusting pin just
touches the stop. This should allow thepin
to benear thecorrect position. Further ad-
justment may be necessary as you mount
the bar.
5.
6.
Slide guide bar behind clutch drum until
guide bar stops against clutch drum
sprocket.
Checking the tension:
Use the screwdriver end of the chain adjust-
menttool(bar tool) tomovethe chainaround
the bar. If the chain does not rotate, it is too
tight.Iftooloose, thechainwillsagbelowthe
bar.
Mount the bar
Prepare the chain by checking the proper
direction. Without followingthe illustrationit
is easy toplacethechainon thesaw inthe
wrong direction. Use the illustration of the
chain to determine the proper direction.
Chain Adjustment
Tool (Bar Tool)
Chain Brake Nuts
Tip of
Bar
Adjusting the tension:
Chain tension is very important. Chain
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each time
before you start the chain saw.
You
can adjust the chain tension by
CUTTERS MUST FACE IN
DIIRECTION OF ROTATION
loosening the chain brake nuts and turning
the adjusting screw 1/4 of a turn while lifting
up on the bar.
7
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro PP4620AV |
| Model Year | 2010 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)