Toro Power Clear 38583 38584 Snow Blower Operators Manual, 2010

6.
Remove the shroud (Figure 25).
13. Connect the wire to the spark plug.
14.
15.
Remove the fuel tank cap.
Install the shroud with the screws you removed in
step 4.
Note: Ensure that the upper and lower shrouds fit
together in the side grooves.
16.
17.
Install the fuel tank cap.
Install the chute seal, the discharge chute, and the
discharge chute handle onto the snowthrower using
the hardware you removed in step 3.
Note: The small screw goes through the small hole
in the chute seal at the front of the discharge chute
opening.
Replacing the Drive Belt
If drive belt becomes worn, oil-soaked, excessively
cracked, frayed, or otherwise damaged, replace the belt.
1.
Remove the drive belt cover by removing the 3 bolts
as shown in Figure 27.
Figure 25
1.
Screw (4)
Shroud
3.   Spark-plug wire
2.
7.
Install the fuel tank cap.
8.
Disconnect the wire from the spark plug.
Clean around the spark plug.
9.
10.
Remove the spark plug from the cylinder head.
Important:  Replace a cracked, fouled, or
dirty spark plug. Do not clean the electrodes
because grit entering the cylinder can damage
the engine.
11.
Set the gap on the plug to 0.030 inch (0.76 mm)
(Figure 26).
Figure 27
1.
2.
Drive belt cover
Bolt (3)
6.
7.
Drive belt
Rotor shaft
3.
Rotor pulley bolt
8.
Brake spring (unhook from
idler arm here)
4.
5.
Curved washer
Rotor pulley
9.
Idler pulley
10.
Engine pulley
2.
Unhook the brake spring from the idler arm to
release the belt tension (Figure 27).
Figure 26
3.
4.
Remove the screw and curved washer that holds the
rotor pulley (Figure 27).
1.
2.
Center electrode insulator
Side electrode
3.   Air gap (not to scale)
Remove the rotor pulley and  the drive belt
(Figure 27).
12.
Install the spark plug and tighten it securely.
15
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38583, 38584
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number310000001 - 310999999
Product NameToro Power Clear Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesPower Clear, Snowthrower
Swath21 inch
DischargeSingle Stage
Engine ManufacturerBriggs & Stratton
Engine Oil TypeToro 2 cycle / NMMA-TCW3
Engine Motor Model #0842330199E8
Engine Motor Size141cc
Engine Motor Type2 Cycle EPA2
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 1 out of 1)
Lawn and Garden readers have rated Toro Power Clear 38583 38584 Snow Blower Operators Manual, 2010 1.0 out of 1.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro Power Clear 38583 38584 Snow Blower Operators Manual, 2010 SKU UPC Model
rob on Dec 18, 2013.



0 thoughts on “Toro Power Clear 38583 38584 Snow Blower Operators Manual, 2010

  1. What is the Gas Tank capasity on this 2009 Model 38583 Snowblower?

Leave a Reply to Ronald W Notsch Cancel reply

Your email address will not be published. Required fields are marked *

*
*
Website