7.
Install the curved washer and the rotor pulley bolt
and tighten them securely (Figure 38).
Note: The concave side of the curved washer goes
against the outside of the pulley.
8.
9.
Install the brake spring onto the idler arm (Figure 39).
Install the drive belt cover with the bolts you
removed in step 1.
Note: Ensure that the drive belt is properly adjusted
and operating; refer to Checking the Control Cable
and Adjusting the Control Cable.
Adjusting the Quick Shoot™
Control
Figure 38
1.
2.
Drive belt cover
Bolt (3)
6.
7.
Drive belt
Rotor shaft
If there is more than 1/2 inch (13 mm) of slack in the
Quick Shoot cable (Figure 40) or the discharge chute
does not rotate left and right in equal angles, adjust the
Quick Shoot control cables.
3.
Rotor pulley bolt
8.
Brake spring (unhook from
idler arm here)
4.
5.
Curved washer
Rotor pulley
9.
Idler pulley
10.
Engine pulley
2.
Unhook the brake spring from the idler arm to
release the belt tension (Figure 38).
3.
4.
5.
Remove the screw and curved washer that holds the
rotor pulley (Figure 38).
Remove the rotor pulley and the drive belt
(Figure 38).
Install the new drive belt, routing it as shown in
(Figure 39).
Figure 40
1.
1/2 inch (13 mm) maximum slack
1.
Loosen the two Quick Shoot control cable clamps
(Figure 41).
Figure 39
1.
Brake spring (install on
idler arm here)
3.
4.
Engine pulley
Rotor pulley
2.
Idler pulley
Note: Route the new drive belt first around the
engine pulley, then the idler pulley, and finally around
the loose rotor pulley positioned just above the rotor
shaft (Figure 38).
Figure 41
6.
Install the rotor pulley onto the rotor shaft
(Figure 38).
1.
Cable clamps
16
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38588, Toro 38589 |
| Model Number | 38588, 38589 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 311000001 - 311003576 |
| Product Name | Toro Power Clear Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Series | Power Clear, Snowthrower |
| Swath | 21 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | 20 oz. (.6 L) 5w-30 synthetic or 5w-30 below 40F (4c) or 10w-30 above 0F (-20c) |
| Engine Motor Model # | 115-0667 |
| Engine Motor Size | 163cc |
| Engine Motor Type | 4 Cycle |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)