Toro 37772 Power Max 826 OE Snowblower Manual, 2013

Operating the Auger/Impeller
Drive
1.
To engage the auger/ impeller drive, squeeze the right
hand (auger/ impeller) lever to the handgrip (Figure
31).
Figure 32
Moving the Discharge Chute
Figure 31
Hold the blue trigger cap down and move the Quick Stick
to the left to move the discharge chute to the left; move the
Quick Stick to the right to move the discharge chute to the
right (Figure 33).
2.
3.
To stop the auger and impeller, release the right hand
lever.
Important:  When you engage both  the
auger/impeller lever and the traction lever, the
traction lever locks the auger/impeller lever down,
freeing your right hand. To release both levers,
simply release the left hand (traction) lever.
If the auger and impeller continue to rotate when you
release the auger/impeller lever, do not operate the
machine. Check the auger/impeller cable (refer to
Checking and Adjusting the Auger/Impeller Cable)
and adjust it if necessary. Otherwise, take the machine
to an Authorized Dealer for service.
WARNING
If the auger and impeller continue to rotate
when you release the auger/impeller lever,
do not operate the machine, as you could
seriously injure yourself or others.
g018894
Figure 33
Take it to an Authorized Service Dealer for
service.
If the chute does not move, refer to Adjusting the
Discharge Chute Latch.
Operating the Quick Stick™
If the chute does not turn as far to the left as it does to
the right, ensure that the cable is routed to the inside of
the handles. Refer to Installing the Upper Handle.
Hold the blue trigger cap down to use the Quick Stick to
move the discharge chute and the chute deflector. Release the
trigger cap to lock the discharge chute and chute deflector
into position (Figure 32).
If the chute does not lock into place when you release the
trigger cap, refer to Adjusting the Discharge Chute Latch.
Moving the Chute Deflector
Hold the blue trigger cap down and move the Quick Stick
forward to lower the chute deflector; move it rearward to raise
the chute deflector (Figure 34).
17
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number37772
Model Year2013
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number313000001 - 313999999
Product NamePower Max 826 OE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Max
Swath26 inch
DischargeTwo Stage
Engine ManufacturerBriggs & Stratton
Engine Oil Type18 oz. (.54l) 30w or 10w-30 / API SF or higher
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #12D1050172F8
Engine Motor Size205cc
Engine Motor Type4 Cycle
Engine Speed3300±100 RPM
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Tire Pressure17-20 PSI / 116-137 kPa
Spark PlugChampion QC12YC
Spark Plug Gap.030"/ .76mm
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website