Toro Wireless RainSensorTM Model 53770 Sprinkler Irrigation Owners Manual

Wireless RainSensor
Model 53770
User’s Guide
Contents
Page
Component Overview . . .  . . . . . . . . . .  . . .2
Quick Start Installation Instructions .  . . . . .3
Detailed Installation Instructions  . . . . . . .  .4
Mounting the Receiver  . . . . . .  . . . . . . .4
Receiver Control Wire Connection . .  .4-5
Receiver Power Wire Connection  . . . . .6
Initial Receiver Testing  . . . . . .  . . . . . . .7
Rainfall Adjustment   . . . . . . . .  . . . . . . .7
Sensor/Transmitter Installation    . . . . . .7
Testing Signal Strength   . . . . .  . . . . . . .7
Testing Control System Operation   . . . .7
Installing the Sensor/Transmitter   . . . . .8
Wireless RainSensor Operation  . . .  . . . . .9
Normal Operation . . . .  . . . . . . . . . .  . . .9
Smart Bypass   . . . . . .  . . . . . . . . . .  . . .9
Power Down   . . . . . . .  . . . . . . . . . .  . . .9
Receiver Learn Mode .  . . . . . . . . . .  . . .9
Attention Required  . . . . .  . . . . . . . . . .  .9
Battery Replacement  . .  . . . . . . . . . .  . . .10
Changing Sensor/Transmitter Code   . . . .10
Troubleshooting . . . .  . . . . . . . . . .  . . .10-11
Electromagnetic Compatibility .  . . . . . . . .11
Specifications . . . .  . . . . . . . . . .  . . . . . . .12
Warranty   . . . . . . . . .  . . . . . . . . . . .  . . . .12
Sensor/Transmitter
Receiver
Introduction
The Toro Wireless RainSensor connects to your  irrigation system controller/timer to
suspend automatic watering operation in the event  of rain. Designed for ease of
installation, your sensor-controlled irrigation system will be  up and running in minutes.
Before attempting the installation, please read through  these instructions in their
entirety, and refer the installation instructions for  your irrigation system controller/timer
in regards to connecting a rain sensor  or rain switch. The Wireless RainSensor is
designed to work with either Normally Open  or Normally Closed sensor circuits.
Important: Please note the following information  regarding installation and use
of the Wireless RainSensor components:
The RainSensor Receiver is designed to operate  with 24 V ac power only.
Connecting the Receiver wiring to 120/240 V  ac power may result in severe
equipment damage.
Installation methods must comply with all applicable  national and local building
codes. If you are unsure about proper  wiring practices, have a qualified contrac-
tor perform the installation for you.
The Receiver cover should always be used  when the Receiver is installed out-
doors.
The Sensor/Transmitter should never be submerged in  water or installed inside a
rain gutter.
Product Specification
CategoriesSprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 12 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website