BEFORE STARTING ENGINE
WARNING:THROWN OBJECTS can result in
personal injury and/or property damage.
ALWAYS position discharge chute and
deflector in safe direction and angle before
starting engine. DO NOT allow anyone in front
of unit during operation. Be familiar with area
of operation.
WARNING: IMPROPER CLOTHING AND
SAFETY GEAR could result in death or
serious injury. Wear adequate winter gear,
protective gloves and footwear which will
improve footing on slippery surfaces. DO NOT
wear loose clothing or jewelry and tie back
hair that may get caught in rotating parts.
IMPORTANT: DO NOT force frozen chute controls.
Start engine and run for 3-5 minutes. If still frozen, take
unit to a warm place to thaw.
THROWN OBJECTS could result in death or
serious injury. Wear safety goggles to protect
eyes.
Discharge Chute Deflector
The discharge chute deflector controls how high snow
is thrown.
CAUTION: THROWN OBJECTS can result in
personal injury and/or property damage. DO
NOT throw snow any higher than necessary.
CAUTION: THROWN OBJECTS can cause
personal injury and/or property damage. DO
NOT throw snow any higher than necessary
1.
Check for Frozen Auger
•
With key in "Stop" position, squeeze auger clutch
bail to Engaged position and pull recoil starter
handle.
If you cannot pull starter handle, auger is frozen.
Move unit to a heated area to thaw to prevent
possible damage.
If chute deflector does not stay in set position,
adjust as directed in Service and
Adjustments, or repair before operation.
•
Use handle at rear of deflector to position deflector at
desired height.
2.
Check Function of Clutches
Push down handle to increase height of discharge.
Pull up on handle to decrease height of discharge.
WARNING: FAILURE OF CLUTCHES OR
BRAKES may result in death or serious injury.
Check clutch and brake function before each
use. Repair or adjust before operation.
Handlebars
Adjust upper handlebar by selecting alternate holes for
"J" Bolts.
Tighten handlebar knobs to secure upper handlebar.
The upper handlebar can be folded for storage.
With key in "Stop" position, squeeze auger clutch bail
to Engaged position and pull recoil starter handle.
Auger should rotate with the turning of the engine.
Release the auger clutch bail.
Scraper Blade
The scraper blade allows the back of the housing to
keep better contact with the surface being cleared. It
also prevents damage to the housing from normal
wear.
If the auger clutch bail moves freely with no resistance
before contacting handlebar, adjust or repair before
operation.
IMPORTANT: DO NOT allow scraper blade to wear
down too far or auger housing will become damaged.
3.
Check Engine Fuel Level
WARNING: FLAMMABLE FUEL and its
EXPLOSIVE VAPORS can cause death or
serious injury. handle fuel with extreme care.
ALWAYS use an approved fuel container. NO
Smoking! NO Lighted Materials! NO Open
Flames! Allow engine to cool before any
service.
Fuel Level Indicator
The fuel level indicator is an extension of the fuel tank
that allows you to see the level of fuel in the tank
without removing the fuel cap.
STOPPING IN AN EMERGENCY
Immediately release auger clutch bail to stop unit
movement.
Add fuel if required. Refer to Filling the Fuel Tank.
Stop Engine, remove Key and wait for all rotating parts
to stop before leaving operators position.
GB - 10
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 322, Ariens 522, Ariens 938015, Ariens 938016 |
| Download File |
|
| Document Type | Parts Catalog |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)