OPERATION
THr OTTLe COnTr OL
War ning
This lever controls the engine speed and stop function. Through three
separate positions on the lever from left to right, the operation is as
follows:
Use extreme care when handling gasoline. Gasoline is extremely
flammable and the vapors are explosive. Never fuel machine indoors
or while the engine is hot or running. Extinguish cigarettes, cigars,
pipes, and other sources of ignition.
STOP
gasoline
1.
.
Remove fuel cap from the fuel tank.
Start/ Run
Slow/ Idle
Engine Off
2
Make sure the container from which you will pour the gasoline is
clean and free from rust or foreign particles. Never use gasoline
that may be stale from long periods of storage in its container.
Gasoline that has been sitting for any period longer than four
weeks should be considered stale.
CHOke COnTr OL
The choke control is used to choke the carburetor and assist in starting
the engine.
3.
Fill fuel tank with clean, fresh, unleaded regular gasoline only. Do
not use gasoline containing METHANOL. Replace fuel cap.
STar Ter HanDLe
Used to start the engine.
CaUTiOn
Use Alcohol blended fuels (called gasohol or using ethanol or metha-
nol) can attract moisture which leads to separation and formation of
acids during storage. Acidic gas can damage the fuel system of an
engine while in storage.
gaS anD OiL FiLL-UP
Oil (one bottle shipped with unit)
First Time Use
1
.
.
Remove oil fill dipstick.
CaUTiOn
2
With the Yard Vacuum on level ground, use a funnel to empty
entire contents of oil bottle provided into the engine.
Replace oil fill dipstick and tighten.
To avoid engine problems, the fuel system should be emptied before
storage for 30 days or longer. Drain the gas tank, start the engine
and let it run until the fuel lines and carburetor are empty. Use
fresh fuel next season. See STORAGE Instructions for additional
information.
3.
Subsequent Uses
Only use high quality detergent oil rated with API service classification
SF, SG, or SH. Select the oil’s SAE viscosity grade according to the
expected operating temperature. Follow the chart below.
CaUTiOn
Neverpermanentuse enginedamageormaycarburetoroccur. cleaner products in the fuel tank or
Colder
Warmer
NOTE: Check the fuel level periodically to avoid running out of gaso-
line while operating the Yard Vacuum. If the unit runs out of gas as it
is chipping, it may be necessary to unclog the discharge area before it
can be restarted. Refer to SERVICE AND ADJUSTMENT section.
5
W30
SAE30
Oil Viscosity Chart
Although multi-viscosity oils (5W30, 10W30, etc.) improve starting
in cold weather, they will result in increased oil consumption when
used above 32°F. Check your engine oil level more frequently to avoid
possible engine damage from running low on oil.
1
.
Check the oil level making certain not to rub the dipstick along the
inside walls of the oil fill tube. This would result in a false dipstick
reading. Refill to FULL mark on dipstick, if necessary. Capacity
is approximately 18 oz. Overfilling will cause the engine to smoke
profusely and will result in poor engine performance.
Replace oil fill dipstick and tighten.
2.
.
3
Keep oil level at FULL. Running the engine with too little oil can
result in permanent engine damage.
1
| Categories | Blower Vacuum and Sweeper Manuals, Craftsman Blower and Vacuum Manuals, Craftsman Lawn Mower Manuals, Lawn Mower Manual |
|---|---|
| Tags | Craftsman 247.770120 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Craftsman. Customer Service Representatives are available by phone: Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | craftsman.com |
| Wikipedia's Page | Craftsman (tools) |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)