TROUBLESHOOTING
WARninG
Before performing any type of maintenance/service, disengage all
controls and stop the engine. Wait until all moving parts have come to
a complete stop. Disconnect spark plug wire and ground it against the
engine to prevent unintended starting. Always wear safety glasses during
operation or while performing any adjustments or repairs.
Thisat 1-800-4-MY-HOME®.section addresses minor service issues. To locate the nearest Sears Service Center or to schedule service, simply contact Sears
Problem
Engine fails to start
Cause
Remedy
1. Place throttle/choke control lever into choke position.
1. Choke not activated
2
3
4
5
6
.
.
.
.
.
Throttle/choke control not in correct position 2. Place throttle/choke lever into fast position.
Spark plug wire disconnected
Faulty spark plug
3. Connect wires to spark plug.
4. Clean, adjust gap, or replace.
Fuel tank empty or stale fuel
5. Fill tank with clean, fresh gasoline.
Blocked fuel line
6. Have fuel line cleaned by a Sears service dealer.
Engine runs erratically
Engine overheats
1. Unit running with choke applied
1. Move throttle/choke lever out of choke position.
2. Connect and tighten spark plug wire.
3. Fill tank with fresh gasoline.
2.
3.
4.
5.
Spark plug wire loose
Stale fuel
Water or dirt in fuel system
Dirty air cleaner
4. Drain fuel. Refill with fresh fuel.
5. Replace air cleaner cartridge.
1. Engine oil level low
1. Fill engine with proper amount and type of oil.
2. Clean grass clippings and debris from around the
engine’s cooling fins and blower housing.
2.
Air flow restricted
Engine hesitates at high RPMs 1. Spark plug gap set too close
Engine idles poorly
1. Remove spark plug and adjust gap.
1. Fouled spark plug
1. Replace spark plug and adjust gap.
2.
Dirty air cleaner
2. Replace air cleaner cartridge.
Excessive vibration
1. Cutting blades loose or unbalanced
1. Tighten blade and spindle. Balance blade.
2. Replace blade.
2
.
.
Damaged, dull, or bent cutting blade
Loose hardware
3
3. Tighten all nuts and bolts.
Unit fails to propel itself
Poor mowing performance
1. Drive belt loose or damaged
1. Dull blade(s)
1. Replace drive belt.
1. Sharpen or replace blade(s).
2
.
.
Broken, loose, or worn belt(s)
Blade(s) out of balance
2. Replace belt(s).
3
3. Balance or replace blade(s).
| Categories | Craftsman Lawn Mower Manuals, Lawn Mower Manual |
|---|---|
| Tags | Craftsman 247.889330 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Craftsman. Customer Service Representatives are available by phone: Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | craftsman.com |
| Wikipedia's Page | Craftsman (tools) |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)