WATER SUPPLY
(Cold Water Only)
CAUTION
■
Flow rate of water supply must not fall below
When connecting the water inlet to the water
supply mains, local regulations of your water
company must be observed. In some areas
the unit must not be connected directly to
the public drinking water supply. This is to
ensure that there is no feedback of chemicals
in to the water supply. Direct connection via
a receiver tank or backfl ow prevented, for
example, is permitted. Dirt in the feed water
will damage the unit. To avoid this risk, we
recommend fi tting a water fi lter.
2.5 GPM (gallons per minute)
■
Flow rate can be determined by running the
water for one minute into an empty 5-gallon
container.
■
The water supply temperature must not ex-
ceed 104°F/40°C.
■
■
Never use the pressure washer to draw in
water contaminated with solvents, e.g. paint
thinners, gasoline, oil, etc.
Always prevent debris from being drawn into
the unit by using a clean water source. Use
additional water fi lter.
■
Garden hose must be at least 5/8 inch
diameter.
ASSEMBLY INSTRUCTIONS
Required Tools (included)
Description
7/16" (or 11mm) Wrench Stamped
Hardware (included)
Description
Purpose
Illustration
Qty
2
A
Joint
Joint Assembly
B
1/4" Nut
Joint Assembly
6
English 5
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher G 3200 XH |
| Download File |
|
| Language | English, Français, Español |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)