OPERATING INSTRUCTIONS
NOTE: Engines controls shown may appear different.
Step1
Check oil level. Oil level should be level
with the bottom of the oil filler neck. Be sure the
Step2
Fill gas tank
Step3
Connect garden
hose to the cold
water source
and turn water
on completely.
machine is level when checking the oil level. (Refer to with unleaded
the engine’s operating manual for seasonal grades.)
gasoline.
Do not use
leaded gasoline.
We recommend that the oil be changed after the first
5
hours of use, then once every 50 hours.
Note: Improper oil levels will cause low oil sensor to
shut off engine.
Never use hot
water.
4
Step4
Trigger the gun
Step5
Slide the choke
Step6
fuel valve to the on position.
Slide the throttle lever toward
the fast position.
Slide or turn the
to eliminate trapped air, wait
for a steady flow of water to
emerge from the spray
nozzle.
lever to the left to the closed
position (on a warm engine,
leave the choke lever in the
open position).
NOTE: HD 2700 DB has a
ON/OFF knob. Turn fuel knob
to “ON” position.
Step7
switch to the “ON” position.
Turn the engine
Step8
Pull the starter
Step9
Adjust pressure
control to desired setting.
handle. If the engine fails to
start after 3 pulls, squeeze
the trigger gun to release
pressure, and repeat step.
NOTE: HD 3500 DB has a
has a toggle switch. Press to
“ON” position.
After the engine is warm and
running smoothly, slide the
choke lever to the right (open)
and throttle to the left (fast).
Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
---|---|
Tags | Kärcher HD 2700 DB, Kärcher HD 2700 DH, Kärcher HD 3000 DH, Kärcher HD 3500 DB, Kärcher HD 3500 DH |
Download File |
|
Language | English |
Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
Document File Type | |
Publisher | karcherresidential.com |
Wikipedia's Page | Kärcher |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)