HD3000 Manual 9/20/02 5:28 PM Page 4
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
Step1 Attach the handle
to the frame of the pressure
washer. Align holes, insert
bolts, and tighten with knobs.
Step2 Attach the
gun/hose storage handle.
Step3 Attach the reel
to the handle. Align holes,
insert bolts, and tighten
with nuts.
Step1 Check oil level. Oil level should be level
Step2
Step3
with the bottom of the oil filler neck. Be sure the
Fill gas tank
Connect garden
hose to the cold
water source
and turn water
on completely.
machine is level when checking the oil level. (Refer to with unleaded
the engine’s operating manual for seasonal grades.)
gasoline.
Do not use
leaded gasoline.
We recommend that the oil be changed after the first
5
hours of use, then once every 50 hours.
Note: Improper oil levels will cause low oil sensor
to shut off engine.
Never use hot
water.
Step4 Place the quick
connect nozzles in the
nozzle holder.
Step5 Attach the
wand to the spray gun.
Step6 Pull the spring-
loaded collar of the wand
back to insert your choice
of quick connect nozzle.
3
4
Step4 Trigger the gun
to eliminate trapped air, wait
for a steady flow of water to
emerge from the spray
nozzle.
Step5 Slide the choke
lever to the left to the “CLOSED” valve to the “ON” position.
position (on a warm engine, leave Slide the throttle lever left
the choke lever in the open
position).
Step6 Slide the fuel
about 1/3 of the way toward
the fast position.
Step7 Release the collar Step8 Attach the
and push the nozzle until the high pressure hose to the
collar clicks. Pull the nozzle to spray gun.
make sure it is seated properly.
Step9 Connect the
high pressure hose to the
unit’s high pressure outlet.
Important!
Do not run the engine with a high or low oil level as
this can cause engine damage. If you have further
questions regarding the engine, please refer to the
engine’s operating manual included with the unit.
Step7 Turn the engine
switch to the “ON” position.
Step8 Pull the starter
handle. If the engine fails to
start after 3 pulls, squeeze
the trigger gun to release
pressure, and repeat step.
Step9 Adjust pressure
control to desired setting.
After the engine is warm and
running smoothly, slide the
choke lever to the right (open)
and throttle to the left (fast).
Step10 Connect the
garden hose to unit’s
water inlet.
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher HD 3000 DH Q C |
| Download File |
|
| Language | English, Français, Español |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)