IMPORTANT PRECAUTIONS – continued
Water Supply (Cold Water Only)
•
•
•
Water hose must be at least a 1/2 inch or
/8 inch in diameter.
Flow rate of water supply must not fall
below 2 GPM (gallons per minute).
Flow rate can be determined by running the
water for one minute into an empty 5-gallon
container.
The water supply temperature must not
exceed 104°F/40°C.
• Never use the pressure washer to draw in
water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
NOTE: Dirt in the feed water will
damage the unit. To avoid this risk,
we recommend fitting a water filter.
5
• Always prevent debris from being drawn into
the unit by using a clean water source and an
accessory water filter if required.
•
ASSEMBLY INSTRUCTIONS
4
Step 1
Step 3
Step 2
Pull out the locking slide
from the right side of the
trigger gun handle.
Push the locking slide back
into the trigger gun to lock the
hose in position.
Insert the small end of the
high pressure hose into
place.
Step 4
Connect the detergent suction
tube to the pressure washer.
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher K 2.35 M |
| Download File |
|
| Language | English, Français |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)