IMPORTANT PRECAUTIONS – continued
Water Supply
(Cold Water Only)
•
•
The water supply temperature must not
exceed 104°F/40°C.
•
•
•
Water hose must be at least 3/4 inch in
diameter.
Never use the pressure washer to draw in
water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).
Flow rate can be determined by running the
water for one minute into an empty“ 5-
gallon container.
•
Always prevent debris from being drawn
into the unit by using a clean water source.
ASSEMBLY INSTRUCTIONS
4
Step 1
Step 2
Step 3 Place the filter end of
Open the detergent tank.
Connect the detergent suction detergent suction tube into the
tube to the pressure washer
container.Assemble the
detergent tank.
Step 4
Step 5
Pull out the locking slide from
the right side of the trigger gun
handle, and insert the small end
of the high pressure hose into
place. Push the locking slide
back into the trigger gun to lock
the hose in position.
Insert the Spray Wand
Extension into the trigger gun.
Press in against the spring
tension and twist into the lock
position. Turn the Spray Wand
Extension Collar clockwise
until tight.
Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
---|---|
Tags | Kärcher K 2.40 |
Download File |
|
Language | English, Español |
Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
Document File Type | |
Publisher | karcherresidential.com |
Wikipedia's Page | Kärcher |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Lawn and Garden readers have rated Kärcher K 2.40 Electric Power High Pressure Washer Owners Manual 5.0 out of 5.0 based on 1 product reviews.
I have had this for over 20 years; finally wearing out but has been a great Pressure Washer!