IMPORTANT PRECAUTIONS – continued
Water Supply
(Cold Water Only)
•
•
•
Water hose must be at least 3/4 inch
in diameter.
Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).
Flow rate can be determined by running
the water for one minute into an empty
• The water supply temperature must not
exceed 104°F/40°C.
• Never use the pressure washer to draw in
water contaminated with solvents, e.g. paint
thinners, gasoline, oil, etc.
• Always prevent debris from being drawn into
the unit by using a clean water source.
5-gallon
container.
ASSEMBLY INSTRUCTIONS
3
Step1 Insert the hook of
the lower part of each wheel
bracket into the slot located at brackets and line up the
the bottom of the unit, then
slide the upper hook into the
slot located at the top of the
unit until it snaps into place.
Step2 Slide the two han-
dle posts into the wheel
Step3 Slide the handle
onto the two handle posts and
line up the holes. Insert each
of the two short screws and
tighten.
holes. Insert each of the two
long screws and tighten.
Step4 Pull out the locking Step5 Connect the
Step6 Insert the Spray
Wand Extension into the trig-
ger gun. Press in against the
spring tension and twist into
the lock position. Turn the
Spray Wand Extension Collar
clockwise until tight.
slide from the right side of
the trigger gun handle, and
insert the small end of the
high pressure hose into
detergent suction tube to
the pressure washer.
place. Push the locking slide
back into the trigger gun to
lock the hose in position.
Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
---|---|
Tags | Kärcher K 205 M Plus |
Download File |
|
Language | English |
Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
Document File Type | |
Publisher | karcherresidential.com |
Wikipedia's Page | Kärcher |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)