WORKING WITH DETERGENTS
Detergents can only be applied at
low pressure setting (Mix).
STEP 4:
Turn on the pressure washer (I).
STEP 1:
Pull trigger to operate unit. Liquid
detergent is drawn into the unit and
mixed with water. Apply detergent
to work area. Do not allow deter-
gent to dry on surface.
Install the Vario Power Spray
Wand. Set the spray wand to the
low pressure setting (Mix).
STEP 2:
Fill the detergent tank with Karcher
detergent and position the tank into
its storage area. Insert the suction
tube with filter into the tank and
close it with the cap.
STEP 5:
To rinse, move the VPS out of „Mix“
position and pull trigger to operate
unit.
STEP 6:
Cleaning up: Always draw fresh
water through the detergent tank or
siphon tube when done to flush any
remaining detergents from the in-
jection system.
For best results see Cleaning Tips
for specific information on how to
clean different surfaces.
Always Use Kärcher® Detergent for
Best Results
Kärcher® biodegradable detergents
are specially formulated to protect the
environment and your pressure wash-
er. The special formula won’t clog the
suction tube filter and will protect the
internal parts of the pressure washer
STEP 3:
Adjust the suction volume of the de-
tergent solution by means of the
dosage regulator for detergents.
for a longer life. For Kärcher Deter-
®
gents, check your retailer or visit our
website:
www.buykarcher.com
English 11
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher K 3.540 |
| Download File |
|
| Language | English, Français, Español |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)