TROUBLESHOOTING
ƽ CAUTION
Disconnect the machine from the power
source before making any repair.
Symptom
Cause
Solution
Motor will not start
On/Off switch is in the “OFF” Turn switch to the “ON” (I) po-
(O) position.
sition
Power cord is not plugged in. Plug in power cord.
Electrical outlet does not sup-Try a different outlet.
ply adequate power.
Tripped circuit breaker.
Switch off pressure washer.
The reset comes automaticly
once the temperature of the
unit drops.
Unit does not reach Diameter of garden hose is Replace with a 5/8 inch or
high pressure.
too small.
larger garden hose.
Water supply is restricted.
Check garden hose for kinks,
leaks and blockage.
Not enough inlet water supply.Open water source full force.
Water inlet filter is clogged.
Remove filter and rinse out in
warm water.
Spray wand is on low pres-
sure position.
Turn spray wand to high pres-
sure position.
Output pressure var- Not enough inlet water supply.Turn water on full force.
ies high and low.
Check garden hose for kinks,
leaks or blockage.
Pump is sucking air.
Check that hoses and fittings
are air tight. Turn off machine
and purge pump by squeezing
trigger gun until a steady flow
of water emerges through the
nozzle.
Water inlet filter is clogged.
Remove filter and rinse out in
warm water.
Discharge nozzle is obstruct- Blow out or remove debris
ed.
with a fine needle.
Calcified gun, hose or spray Run distilled vinegar through
wand.
detergent suction tube.
16
English
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher K 3.98 M |
| Download File |
|
| Language | English, Français, Español |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)