IMPORTANT PRECAUTIONS – continued
Water Supply (Cold Water Only)
•
•
•
Water hose must be at least 3/4 inch in
diameter.
Flow rate of water supply must not fall
below 2 GPM (gallons per minute).
Flow rate can be determined by running
the water for one minute into an empty
• Never use the pressure washer to draw
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
NOTE: Dirt in the feed water will
damage the unit. To avoid this risk,
we recommend fitting a water filter.
5-gallon
The water supply temperature must not
exceed 104°F/40°C.
container.
•
Always prevent debris from being drawn
into the unit by using a clean water source
and an accessory water filter if required.
•
ASSEMBLY INSTRUCTIONS
4
Step 1 Align holes on adapter brackets
with the posts on pressure washer as
shown.
Step 2 Insert each of the four long
screws and tighten.
Step 3 Before pressing down handle onto
top of adapter brackets, the hose/cord
caddy and trigger gun holder must be on
opposite sides.
Step 4 Insert each of the two short
screws and tighten.
Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
---|---|
Tags | Kärcher K 390 M Plus |
Download File |
|
Language | English, Français, Español |
Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
Document File Type | |
Publisher | karcherresidential.com |
Wikipedia's Page | Kärcher |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)