IMPORTANT PRECAUTIONS –continued
PRECAUTIONS
Water Supply (Cold Water Only)
•
•
•
Water hose must be at least 3/4 inch in
diameter.
•
•
The water supply temperature must not
exceed 104°F/40°C.
Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).
Never use the pressure washer to draw
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
Flow rate can be determined by running
the water for one minute into an empty“
•
Always prevent debris from being drawn
into the unit by using a clean water source.
5-gallon
container.
ASSEMBLY INSTRUCTIONS
4
Step 1
Step 2
Step 3
Attach one adapter bracket to Place detergent tank between Attach handle onto top of
pressure washer by aligning
adapter brackets as shown.
adapter brackets. Press down
to lock. Tighten with screws
as shown.
Note: Hose/cord caddy and
trigger gun holder must be
on opposite sides
holes on adapter bracket with Attach second adapter
posts on the pressure washer asbracket.
shown. Tighten the two screws.
Step 4
Pull out the locking slide from the right side of
the trigger gun handle, and insert the small
end of the high pressure hose into place. Push
the locking slide back into the trigger gun to
lock the hose in position.
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher K 395 M |
| Download File |
|
| Language | English |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)