Kärcher K 460 M Electric Power High Pressure Washer Owners Manual

IMPORTANT PRECAUTIONS –   continued
Water Supply
(Cold Water Only)
Water hose must be at least 3/4  inch in
diameter.
Flow rate of water supply must not  fall
below 2.5 GPM (gallons per minute).
Flow rate can be determined by running
the water for one minute into an  empty
•  The water supply temperature must not
exceed 104°F/40°C.
•  Never use the pressure  washer to draw in
water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
•  Always prevent debris from  being drawn
into the unit by using a clean  water source.
5-gallon
container.
ASSEMBLY INSTRUCTIONS
You will need a standard screw  driver OR a Torx T-25 screw driver
3
Step1   Attach the mobile adapter brackets  to
the pressure washer. Align holes on the  bottom
of the pressure washer as shown and  tighten the
Step2   Spread handle sides
apart and align with slotted areas of
mobile adapter brackets and snap into
position. Tighten the 4 screws.
4
screws.
Step3   Slide the hose caddy into  the handle
slots and snap into place.
Step4   Slide the spray wand
extension into the gun. Turn the wand
collar onto the gun threads until tight.
Product Specification
CategoriesKärcher Pressure Washer Manuals, Pressure Washer Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 12 pages
LanguageEnglish
Product BrandKärcher. Kärcher US Home and garden support phone: 1-800-537-4129
Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer
Document File TypePDF
Publisherkarcherresidential.com
Wikipedia's PageKärcher
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website