IMPORTANT PRECAUTIONS – continued
Water Supply
(Cold Water Only)
•
•
•
Water hose must be at least 3/4 inch in
diameter.
Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).
Flow rate can be determined by running
the water for one minute into an empty
• The water supply temperature must not
exceed 104°F/40°C.
• Never use the pressure washer to draw in
water contaminated with solvents, e.g. paint
thinners, gasoline, oil, etc.
• Always prevent debris from being drawn into
the unit by using a clean water source.
5-gallon
container.
ASSEMBLY INSTRUCTIONS
3
Step1 Place the transport handle onto
the mounting brackets on the sides of the
washer and align the four holes. Hold each
four-sided nut with one finger while inserting
each screw and tighten with a screwdriver.
Step2 Slide the hose caddy into the slots
on the transport handle and snap into place.
Step3 Pull out the locking slide from
the right side of the trigger gun handle,
and insert the small end of the high pres-
sure hose into place. Push the locking
slide back into the trigger gun to lock the
hose in position.
Step4 Insert the Spray Wand Extension
into the trigger gun. Press in against the
spring tension and twist into the lock posi-
tion. Turn the Spray Wand Extension Collar
clockwise until tight.
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher K 502 M |
| Download File |
|
| Language | English |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)