3
Setup and
Adjustment
Securing Blade-Brake Cable
NOTE:followingUsesteps.the hardware in Group 6 to complete the
WARNING: The cable must be routed
properly to avoid contact with all sharp
edges and hot surfaces. Such contacts
damage the cable and render the
controls inoperative.
stud inside
snap fitting
Upper
Handle
Snap
Fitting
1.
2.
Press the stud found inside the snap fitting into the
hole found on the left side of the upper handle, as
shown in Figure 3- 7.
Secure the cable to the lower left handle with a cable
tie. See Figure 3-8. Trim off the extra length of the
cable tie.
Figure 3-
Attaching Starter Rope
NOTE: Use a 7/16” wrench and the hardware in
Group 5 to complete the following steps.
WARNING
1.
Attach the eye bolt to the upper handle and loosely
thread the lock nut on to secure it. Do NOT tighten.
See Figure 3-9.
With the spark plug wire disconnected and grounded,
depress the blade control and pull the rope out of the
engine.
Loop the rope through the eye bolt. See Figure 3-9.
TightenDO NOTtheovertighten.eye bolt to the handle using the lock nut.
Lower
Handle
The cable must be
routed properly to
avoid contact with
all sharp edges and
hot surfaces. Such
contacts damage the
cable and render the
controls inoperative.
2.
3.
4.
Cable Tie
Cutting Height Adjustment
1.
2.
Remove the carriage bolts and related hardware from
Figure 3-
the wheels. See Figure 3-10.
Reattach the wheels with carriage bolts at another
hole. Remember to attach ALL wheels at the same
relative position to ensure an even cut. Refer to
instructions for Attaching The Wheels earlier in this
section. For a higher cutting height, use the lower
hole on the deck. For a lower cutting height, use the
upper hole.
1
Flange
Lock Nut
Eye Bolt
3
low
medium
high
Figure 3-9
Figure 3-10
9
| Categories | Lawn Mower Manual, MTD Lawn Mower Manuals |
|---|---|
| Tags | MTD 020 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Product Type | Walk Behind Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 5)
Lawn and Garden readers have rated MTD 020 Series 20 Inch Rotary Lawn Mower Owners Manual 4.0 out of 5.0 based on 2 product reviews. Good very happy with product. Thanks for the manual I've lost.
The great Zorn of Artimus 4 recomended you guys . He was right. Long live Zorn.