MTD 41M Series Push Lawn Mower Mower Owners Manual

4
Controls and Features
Blade Control
Choke Control
Recoil Starter
Cutting Height
Adjustment
Lever (one at
each wheel)
Grass Catcher
Figure 4-1
Blade Control
Recoil Starter
The blade control is attached  to the upper handle of the mower.
Depress and squeeze it against the  upper handle to operate the
unit. Release it to stop engine and  blade.
The recoil starter is attached  to the right upper handle. Stand
behind the unit and pull the recoil starter  rope to start the unit.
Choke Control
WARNING: This blade control is a safety  device.
Never attempt to bypass its operations.
The choke control is located on the left  side of the handle and
when activated, closes the choke  plate on the carburetor and
aids in starting the engine.  Pull the choke control to activate the
choke on the engine. Use of the choke may not be necessary  if
the engine is warm or the air temperature  is high.
Cutting Height Adjustment Lever
One adjustment lever is located on each wheel  and is used to
adjust the cutting height. All four  levers have to be at the same
relative position to ensure a uniform cut. To adjust  the cutting
height, refer to the “Assembly & Set-Up” Section.
Grass Catcher
The grass catcher, located at the rear of the mower, is used to bag
the grass clippings for disposal at another  site. Once the bag is
full, it has to be removed from the mower and emptied  before
any further mowing.
11
Product Specification
CategoriesLawn Mower Manual, MTD Lawn Mower Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 56 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website