MTD 450 460 Series Vacuum Chipper Shredder Owners Manual

3
Setting Up
Your Chipper
Shredder
Attaching The Chute Deflector
3.
a. Remove the wing knobs  from each side of the lower
impeller housing.
B
b. Remove the hex lock nut, spacers, and hex bolt from
the top of the impeller housing. See Figure 3-3.
a. Align the chute deflector  in position on the
discharge opening and insert hex bolt  with spacer
through hinge on chute deflector (spacers  fit inside
of hinges). See Figure 3-4.
A
4.
b. Place second  spacer over hex bolt inside other
hinge and secure with hex lock nut.
C
c. Secure  both sides of chute deflector to impeller
housing using wing knobs previously removed.
Attaching The Chipper Chute
(Model Series 460)
5.
6.
a. Remove the three cupped  washers and hex nuts
from weld studs around the opening on the side of
the impeller housing. See Figure 3-5.
IMPORTANT
This unit is shipped
without gasoline or
oil in the engine. Be
certain to service
Figure 3-4
b. Remove the hex bolts,  flat washers, and lock nuts
from the two holes on the upper end of the support
brace.
a. Align the chipper  chute over the weld studs, so the
slot in the bottom of the chute is facing down.
b. Secure chipper  chute with the three cupped
washers (cupped side against the chipper  chute)
and hex nuts previously removed. Do not tighten
the nuts at this time. See Figure 3-6.
engine with gasoline
and oil as instructed
in the separate engine
manual before operat-
ing your machine.
B
A
NOTE: All references
in this manual to the
left or right side of
the chipper shredder
is from the operating
position only. Excep-
tions, if any, will be
specified.
Fgure 3-5
NOTE: This Operators
Manual covers a range
of product specifica-
tions for various
models. Characteristics
and features discussed
and/or illustrated in this
manual may not be ap-
plicable to all models.
MTD LLC reserves the
right to change product
specifications, designs
and equipment without
notice and without
A
B
Figure 3-6
incurring obligation.

Product Specification
CategoriesBlower Vacuum and Sweeper Manuals, Lawn Mower Manual, MTD Blower and Vacuum Manuals, MTD Lawn Mower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 36 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website