MTD 550 Series Lawn Edger Owners Manual

7
Service
Belt Replacement
3.
Remove the spindle sheaves belt guard by removing  the
two self-tapping screws which  secure it to the blade plate
assembly. See Fig. 7-2.
Drive Belt
NOTE: To aid in reassembly, note the orientation of the drive belt
on the two idler pulleys and the engine  flywheel pulley prior to
performing the following  steps. See to Fig. 7-1.
Belt Guard
Flange
Luck Nut
Engine Flywheel  Pulley
Figure -
Engine
Flywheel
Pulley
4
5
.
.
Carefully remove the belt from off  of the pulleys, again
making sure to note the orientation of the belt.  Discard the
belt. See Fig. 7-2.
Figure -1
Working from the front of the edger, place the belt  onto
the spindle sheaves, route it back onto the two  idler
pulleys, and then place it onto the engine flywheel  pulley.
The edger drive belt is subject  to wear and should be replaced if
any signs of cracking, shredding or rotting  are present. To replace
the belt, proceed as follows:
NOTE: Make certain that the ā€œVā€  side of the belt is seated
into the top pulley and the flat side of the belt  is seated
into the bottom pulley. See Fig. 7-2.
1
.
Working in front of the edger, loosen the flange  lock nut
on top of the frame, allowing the idler  pulley assembly to
pivot slightly out from the frame. See  Fig. 7-1.
6
.
Reinstall the spindle sheaves belt guard  with the self
tapping screws removed earlier.
2
.
With your other hand, carefully reach  under the rear of
the edger and remove the belt from around  the engine
flywheel pulley. See  Fig. 7-1.
7.
Make certain that the drive belt is on the  engine flywheel
pulley and idler pulleys, and retighten  the flange lock nut
on the top of the frame.
NOTE: Make certain that the drive belt is seated  correctly
and that it is riding smoothly on the spindle  sheaves and is
not pinched between them.  Repeat the first three steps if
the belt is pinched.
WARNING! Never operate the edger  without the
spindle sheaves belt guard in place.
14
Product Specification
CategoriesLawn Mower Manual, MTD Lawn Mower Manuals, MTD Straight Edger Manuals, Straight Edger Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website