4
Operating
Your Snow
Thrower
KnowYour Snow Thrower
Heated Handle Switch (en option)†
Drive Control
Shift Lever
Two-Way Chute Control
Headlights
Auger Control
Wheel Steering Control
Chute Assembly
Chute Directional Control
Clean-Out Tool
Engine Controls
Choke
Control
Gas Cap
Primer
Oil Fill
Electric Start
WARNING
Button
(optional)
Read, understand,
and follow all instruc-
tions and warnings
on the machine and
in this manual before
operating.
Safety
Key
Skid Shoe
Electric Starter
Outlet
Recoil Starter
Rocker
Handle
(optional)
Switch
† If Equipped
Figure 4-1
Now that you have set up your snow thrower for opera-
tion, get acquainted with its controls and features. These
are described below and illustrated on this page. This
knowledge will allow you to use your new equipment to
its fullest potential.
Choke Control
Use extreme care
when handling
The choke control is found on the top of the
engine and is activated by rotating the knob
counter clockwise. Activating the choke
control closes the choke plate on the carbure-
tor and aids in starting the engine.
gasoline. Gasoline is
extremely flammable
and the vapors are
explosive.Never fuel
the machine indoors
or while the engine
is hot or running.
Extinguish cigarettes,
cigars, pipes and
other sources of
ignition.
NOTE: For detailed starting instructions and more
information on all engine controls, refer to the separate
engine manual packed with your unit.
Primer
Depressing the primer forces fuel directly into the engine’s
carburetor to aid in cold-weather starting.
Shift Lever
Oil Fill
The shift lever is located in the center of
6
Engine oil level can be checked and oil added through the
the handle panel and is used to determine
5
oil fill.
ground speed and direction of travel. It can
4
be moved into any of eight positions.
Safety Key
3
2
F 1
The safety key must be pushed in place in order for the
engine to start. Pull the safety key out to prevent unauthor-
ized use of equipment.
IMPORTANT: Always release drive control
before changing speeds.
Forward: The snow thrower has six
forward (F) speeds. Position one (1) is the
Rocker Switch
slowest and position six (6) is the fastest.
R R1
The rocker switch is used to stop the engine. The switch
must be in the “ON” position in order to start the engine.
Reverse: The snow thrower has two
reverse (R) speeds—R1 is the slower of
the two.
R2
10
| Categories | Columbia Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Columbia 769-04101, MTD 769-04101, MTD Snow Blower Manual |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)