2
Attaching Blades
WARNING: Always protect your hands
while servicing blades by wearing heavy
work gloves or using heavy rags.
NOTE: Three 2-in-1 (Discharge/Bag) blades are included
in the grass catcher kit. These will replace the 3-in-1
(Discharge/Bag/Mulch) blades already installed on the
deck of the tractor. For better bagging performance, it is
recommended that you install these new 2-in-1 blades
included with this kit.
To Install Blades: Remove the cutting deck from be-
neath the tractor (refer to instructions for Deck Removal
in your tractor’s operator’s manual), then gently flip the
deck over to expose its underside.
Assembly
And
Operation
•
Place a block of wood between the center deck hous-
ing baffle and the cutting blade to act as a stabilizer.
See Fig. 2-6.
Use a 1-1/8” wrench to remove the hex flange nut
that secures the blade to the outer blade spindle
assembly. See Fig. 2-6.
•
Figure 2-5
WARNING
Wood Block
WARNING: The hex flange nut has a right-
handed thread pattern. Do not attempt to
force the nut in an incorrect direction; it
may damage the nut and create a safety
hazard.
Always protect
your hands while
servicing blades
by wearing heavy
work gloves or using
heavy rags.
Hex Flange Nut
•
•
•
Place a new blade on top of the outer blade spindle
so that side of the blade with part number faces the
ground when the mower is in the operating position.
Secure with the hex flange nut removed earlier. Use a
The hex flange nut
has a right-handed
thread pattern.
torque wrench to tighten the hex flange nut between
70
to 90 foot-pounds.
Replace blades from the other outer and center blade
Do not attempt to
force the nut in an
incorrect direction;
it may damage the
nut and create a
safety hazard.
spindles with the blades from the bagger kit.
NOTE: Save the three blades you just removed to use as
replacements or to reinstall on the blade spindles when
not using the bagger kit.
Spindle Assembly
Figure 2-6
Hex Nut
•
Remount the cutting deck following instructions in the
owner’s manual of the tractor.
Install Deck Baffle
•
•
Remove two of the self-tapping deck screws on the
front right side of your deck. See Fig. 2-7.
Install the front deck baffle using two hex nuts, bel-
leville washers and hex bolts supplied in this bagger
kit.
Deck Baffle
Hex Bolt
NOTE:
Save the three
Washer
blades you just
removed to use as
replacements or to
reinstall on the blade
spindles when not
using the bagger kit.
Figure 2-7
| Categories | Cub Cadet Lawn Mower Manuals, Lawn Mower Manual, MTD Lawn Mower Manuals |
|---|---|
| Tags | Cub Cadet 190, Cub Cadet 192, MTD 190, MTD 192 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)