MTD E173 Snow Blower Owners Manual

pair of pliers to obtain slack in order to hook it into
the control handle. Hold the “Z” fitting with the
pliers, not the cable, to avoid damaging the cable.
Secure eyebolt with 5/16” saddle washer and hex
nut. The cupped side of washer goes against the
handle. Adjust lower hex nut until the eyebolt is
positioned so that the chute crank turns freely
(does not bind).
NOTE: The upper hole in the control handle provides
for adjustment in belt tension. Refer to Belt Tension
Adjustment Section of this manual for instructions.
Move upper hex nut down against the lower
handle. Tighten lower hex nut securely.
Installing chute crank
Assembling the chute
Models with  optional extended chute crank only
The snow thrower has been shipped with the upper
chute pivoted all the way down. Assemble as follows:  
Thread one 5/16” hex nut all the way onto the
eyebolt. See Figure 5. All necessary hardware is
included in the hardware pack shipped with your
unit. See  Figure 2 for more details.
Turn the chute crank until the chute faces straight
to the front. See Figure 7 .
Slide the eyebolt onto the chute crank. Insert
eyebolt into the hole in the lower handle.
Flat
Washer
Hand
Chute Crank
Knob
Carriage
Bolt
Front
Eye Bolt
Hex
Nuts
Upper
Chute
Saddle
Washer
Figure 7
Figure 5
Remove the hand knob, flat washer and carriage
bolt from the upper chute. See Figure 7.
Pivot the upper chute up so that there is no gap
between the upper and the lower chute. See
Figure 8. Secure with hardware just removed.
Insert the chute crank into the coupler at the top
right side of the snow thrower. See Figure 6.
Rotate the crank to align holes, and insert the
cotter pin. Bend ends of cotter pin in opposite
directions to secure. See Figure 6.
Cotter Pin
Chute Crank
No
Gap
Coupler
Pivot
upper
chute
Figure 6
Figure 8
6
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 24 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website