MTD Troy-Bilt 070 Series Vacuum Chipper Shredder Hose Lawn Mower Owners Manual

IMPORTANT: Make sure to insert the z-fitting into the
rear hole as it was inserted in the front hole, that is from
the outside of the drive control.

3.
You may now carefully reinstall the drive control by
performing the previous steps in the opposite  order
and manner of removal.
IMPORTANT: Once assembled and prior to restarting,
make sure that the cable is properly adjusted. With the
drive control disengaged, the unit should freely pull  in
reverse.
Maintaining
Your
Chipper
Shredder
Vacuum
WARNING: Before performing  any type
of maintenance on the machine, wait  for
all parts to stop moving and disconnect
the spark plug wire. Failure to follow this instruction
Figure 5-2
could result in personal injury or  property damage.
Removing the Flail Screen
If the discharge area becomes clogged,  remove the flail
screen and clean area as follows:
1
2
3
.
.
.
Stop the engine. Make certain the chipper/shredder
vacuum has come to a complete stop.
Before unclogging the discharge chute, disconnect
and ground the spark plug wire to retaining  post.
Remove the vacuum bag from the unit as instructed
in the OPERATION section to obtain access to flail
screen.
WARNING
4
.
.
Remove the three self tapping screws securing the
belt cover, and remove belt cover. See Figure 5-2.
Remove self tapping screw on right side of unit that
attaches to the flail screen. It may be necessary  to
remove the hose bracket hanger to get access to the
screw. See Figure 5-3.
Before perform-
ing any type of
5
maintenance on the
machine, wait for all
parts to stop moving
and disconnect the
spark plug wire.
Failure to follow this
instruction could
result in personal
injury or property
damage.
6.
Remove hex screw on top of rear housing near
mounting bracket and the flange lock nut that
secures flail screen. See Figure 5-3.
Figure 5-3
7
.
.
Remove and clean the screen by scraping or wash-
ing with water. See Figure 5-4.
8
Reinstall the screen.
Figure 5-4
1
Product Specification
CategoriesBlower Vacuum and Sweeper Manuals, Lawn Mower Manual, MTD Blower and Vacuum Manuals, MTD Lawn Mower Manuals, Troy-Bilt Blower and Vacuum Manuals, Troy-Bilt Lawn Mower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 24 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website