6
Trouble
Shooting
Problem
Cause
Remedy
Engine fails to start
1. Throttleposition.lever not in correct starting
1. MoveSTARTthrottleposition.lever to FAST or
2. Connect wire to spark plug.
3. Moveposition.choke lever to CHOKE
2.
3.
Spark plug wire disconnected.
Chokeequipped).not in CHOKE position (if
4.
5.
Fuel tank empty or stale fuel.
Engine not primed (if equipped).
4. Fill tank with clean, fresh gasoline.
5. PrimeEngineengineManual.as instructed in
6.
7.
Clean, adjust gap, or replace.
6.
7.
Faulty spark plug.
Engine flooded.
Wait a few minutes to restart, but
do not prime.
Engine runs erratic
Engine overheats
1. Spark plug wire loose.
1. Connectplug wire.and tighten spark
2. Move choke lever to OFF position.
3. Cleanfresh gasoline.fuel line; fill tank with clean,
4. Always run engine at full throttle.
5. Drainfresh fuel.fuel tank. Refill with
6. Refer to engine manual.
7. See authorized service dealer.
2
3
. Unit running on CHOKE (if equipped).
. Blocked fuel line or stale fuel.
For repairs beyond
the minor adjustments
listed here, contact
an authorized service
dealer.
4
. Low engine RPM.
5
. Water or dirt in fuel system.
6
. Dirty air cleaner.
7
. Carburetor out of adjustment.
1. Engine oil level low.
1. Fill crankcase with proper oil.
2. Refer to engine manual.
3. See authorized service dealer.
2
3
. Dirty air cleaner.
. Carburetor not adjusted properly.
Occasional skips
(hesitates) at
high speed
1. Spark plug gap too close.
1. Remove spark plug and adjust gap.
2. See authorized service dealer.
2
. Cimproperlyarburetor set.idle mixture adjustment
Excessive
1. Loose parts or damaged impeller.
1.
See authorized service dealer.
Vibration
Unit does not
discharge
1. Discharge area clogged.
1. Stop engine immediately and
disconnect spark plug wire. Clean
flail screen and inside of discharge
opening.
2.
Foreign object lodged in impeller.
2.
Stop engine and disconnect spark
plug wire. Remove lodged object.
3
. Low engine RPM.
. Vacuum bag is full.
3. Always run engine at full throttle.
4. Empty bag.
4
Rate of discharge
slows considerably
or composition of
discharged material
changes
1. Low engine RPM.
2
1. Always run engine at full throttle.
2. Replaceauthorizedchipperservicebladedealer.or see your
. Chipper blade dull.
12
| Categories | Lawn Mower Manual, MTD Blower and Vacuum Manuals, MTD Lawn Mower Manuals, Troy-Bilt Blower and Vacuum Manuals, Troy-Bilt Lawn Mower Manuals |
|---|---|
| Tags | MTD 204, Troy-Bilt 204 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Product Type | Walk Behind Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)