4
NOTE:priming.A warm engine may not require choking or
features discussed and/or illustrated in this manual may 4. Moveequipped).throttle control lever to FAST position (if
not be applicable to all models. Troy Bilt LLC reserves
This Operators Manual covers a range of product
specifications for various models. Characteristics and
the right to change product specifications, designs
5.
Grasp starter handle and pull rope out slowly until
engine reaches start of compression cycle (rope will
pull slightly harder at this point).
and equipment without notice and without incurring
obligation.
Operating
Your Chipper
Shredder
NOTE: A “clanking” noise may be heard when pulling
the starter rope. It is completely normal and does NOT
indicate a malfunction of any kind.
WARNING: The operation of any
chipper shredder can result in foreign
objects being thrown into the eyes,
which can damage your eyes severely.
6.
Pull rope with a rapid, continuous, full arm stroke.
Keep a firm grip on starter handle. Let rope rewind
slowly.
Always wear the safety glasses provided with this
unit or eye shields before chipping or shredding
and while performing any adjustments or repairs.
7.
Repeat the previous steps until engine starts. When
engine starts, move choke control gradually to RUN
position until the engine is running smoothly.
Gas and Oil Fill-Up
Service the engine with gasoline and oil as instructed in
the separate engine manual packed with your chipper
shredder. Read instructions carefully.
WARNING
WARNING: Never run the engine indoors
or in a poorly ventilated area. Engine
exhaust contains carbon monoxide, an
odorless and deadly gas.
The operation of any
chipper shredder
WARNING: Never fill fuel tank indoors
with engine running or until the engine
has been allowed to cool for at least
two minutes after running.
can result in foreign
objects being thrown.
Always wear the safety
glasses provided with
this unit or eye shields
before chipping or
Stopping Engine
1.
Move throttle control lever to STOP position (if
equipped) or push rocker switch to OFF.
Starting Engine
NOTE: See your engine manual packed with your unit for
IMPORTANT: Because this manual covers several
different model units, different starting instructions may
apply to your particular engine. Some engines may have
a fuel petcock, some may not. Some engines may have
On/Off switches, other may not. Some units will utilize a
choke system, while others will require priming. These
factors depend on what make and model engine comes
with your particular unit. For these reasons, please refer
to the engine operator’s manual for the correct starting
procedure.
more detailed instructions.
shredding and while
performing any adjust-
ments or repairs.
CAUTION: Never stop the engine by
moving the choke lever into the CHOKE
position. Backfire, fire or engine damage
could result.
Never fill fuel tank
indoors with engine
running or until the
engine has been
allowed to cool for
at least two minutes
after running.
Basic Starting Procedure:
1.
Attach spark plug wire to spark plug. Make certain
the metal cap on the end of the spark plug is
fastened securely over metal tip on the spark plug.
2.
3.
Open fuel shut-off valve (If equipped) and make sure
the On/Off switch is in the On position (if equipped).
Move choke control lever to CHOKE position, if
equipped. If the unit has a primer, prime the motor as
instructed in the engine operator’s manual.
Never run the engine
indoors or in a poorly
ventilated area. En-
gine exhaust contains
carbon monoxide, an
odorless and deadly
gas.
8
| Categories | Lawn Mower Manual, MTD Blower and Vacuum Manuals, MTD Lawn Mower Manuals, Troy-Bilt Blower and Vacuum Manuals, Troy-Bilt Lawn Mower Manuals |
|---|---|
| Tags | MTD 410, MTD 420, Troy Bilt 420, Troy-Bilt 410 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Product Type | Walk Behind Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)