4
Blade Control
Blade Depth Control Lever
(Transport Position Shown)
Know Your
Edger
Bevel Adjustment Lever
Primer
Starter Rope/
Recoil Starter
AdjCurbustmHeightent Lever
WARNING:
Be familiar with all
controls and their
proper operation.
Know how to stop the
machine and disengage
them quickly.
Figure 4–1
WARNING: Be familiar with all controls
Blade Depth Control Lever
and their proper operation. Know how
to stop the machine and disengage
them quickly.
The blade depth control lever is located on the right side
of the upper handle. It is used to control the depth of the
cut. The further forward the blade depth control lever is
moved, the deeper into the soil the edger blade will cut.
See Fig. 4–1.
NOTE: Refer to the Engine Manual packed with your
edger for a detailed description of all engine-related
controls and components.
Starter Rope / Recoil Starter
TheSee starterFig. 4–1rope/recoil starter is used to start the engine.
Primer
The primer is used to pump gas into the carburetor and
aid in starting the engine. Use it to start a cold engine,
but do not use it to restart a warm engine after a short
shutdown. See Fig. 4–1
NOTE: Refer to the Engine Manual packed with your
edger for a detailed description of all engine-related
controls and components.
NOTE: Refer to the
Engine Manual packed
with your edger for a
detailed description of all
engine-related controls
and components.
Curb Height Adjustment Lever
The curb height adjustment lever is found on the rear
portion of the edger. When placed in an applicable notch,
it aids in stabilizing the edger while edging grass along a
curb. See Fig. 4–1.
Bevel Adjustment Lever
IMPORTANT:
Become familiar with all the
controls before operating
the edger.
The bevel adjustment lever is located on the front, left
portion of the edger, behind the edger blade. It is used to
vary the angle of the edger blade between one of three
positions for edging/trenching or beveled edging. See
Fig. 4–1.
NOTE: Specifications are
subject to change without
notification or obligation.
Images may not reflect your
exact model and are for
reference purposes only.
IMPORTANT: Become familiar with all the controls
Blade Control
before operating the edger.
Located on the upper handle, the blade control must be
depressed against the upper handle in order to operate
the unit. Releasing the blade control stops the engine
and the edger blade. See Fig. 4–1.
7
| Categories | Lawn Mower Manual, MTD Lawn Mower Manuals, Troy-Bilt Lawn Mower Manuals |
|---|---|
| Tags | MTD 550, Troy-Bilt 550 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Product Type | Walk Behind Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)