MTD White Outdoor 600 Series Snow Blower Owners Manual

.
Figure 18
Figure 17
Skid Shoes
Drive Control
When the drive control is released and in the
disengaged “up” position, the cable should have very
little slack. It should NOT be tight.
NOTE:  The  space  between  the  skid  shoes  and  the
ground can be adjusted. See Figure 19. For close snow
removal,  place  skid   shoe  in  the  low  position.   Use
middle  or  high  position  when  area  to  be  cleared  is
uneven.
Check the adjustment of the drive control as follows:
1.
With the drive control disengaged,
push the snow thrower gently
NOTE: Some models are equipped with reversible skid
shoes  and   may  be   turned  over   to   increase  their
lifespan. See Figure 19.
forward. The unit should roll freely.
Engage the drive control and gently
attempt to push the snow thrower
forward. The wheels should not turn.
The unit should not roll freely.
With the drive control disengaged, move the shift
lever back and forth between the R2 position and
the F6 position several times. There should be no
resistance in the shift lever.
2.
CAUTION: Loose gravel can be picked up
and thrown by the auger, causing injury to the
operator and bystanders and/or damage to
the snow thrower and surrounding property.
Disengaged
3.
Adjust skid shoes by loosening the four hex nuts
(two on each side) and carriage bolts. Move skid
shoes to desired position.
Make certain the entire bottom surface of skid shoe
is against the ground to avoid uneven wear on the
skid shoes. Retighten nuts and bolts securely.
Retighten the hex jam nut and repeat all three tests
to verify proper adjustment has been achieved.
If any of the above tests failed, the drive cable is in need
of adjustment. refer to Figure 18 and proceed as
follows:
Loosen the hex jam nut on the auger control cable
“Z” fitting and rotate the coupling end (without
turning the cable) of the cable downward to
provide more slack or upward to take up slack. See
Figure 18 .
Auger Control
Refer to Auger Control Test on Page 12 to adjust the auger
control.
Standard
Reversible
Figure 19- Skid Shoes
15
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, White Outdoor Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 52 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(2 votes, average: 4 out of 4)
Lawn and Garden readers have rated MTD White Outdoor 600 Series Snow Blower Owners Manual 4.0 out of 4.0 based on 2 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

MTD White Outdoor 600 Series Snow Blower Owners Manual SKU UPC Model
pierre mochon on Jan 16, 2018.

been trying to download your owner s manual and can t get through your security characters what is the problem . I need some info to change some parts
thanks in advance for any info


Normand Pouliot on Oct 17, 2017.

Wery good machine. i want to keep it many more years.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website