Simplicity 3190M 3190E 1694382 1694383 Signle Stage Snow Blower Owners Manual

Section 3 - MAINTENANCE
3.1
INTRODUCTION
3.2.3    CHECK AUGER CLUTCH CONTROL CABLE
To retain the quality of the snow thrower, use only
factory  authorized   replacement  parts.   Contact  a
local   authorized   dealer    for   parts   and   service
assistance. For the correct part or other information
for  a  particular  snow  thrower,  always  mention  the
Model, Manufacturer Number and Serial Number.
1.
Visually check cable for fraying, kinking or severed
cable strands. Replace cable and adjust tension before
operating snow thrower. See Figure 3.3.
3.2
SERVICE - AFTER FIRST 5 HOURS
3.2.1
CHECK AUGER DRIVE BELT  
1.
Visually  check  engine   drive  belt  for  cracking,
fraying,  severed  or  exposed  belt   strands.  Replace
worn belt before operating snow thrower. See Figure
3.1
CHECK AUGER
DRIVE BELT
CHECK AUGER
CONTROL CABLE
FIGURE 3.3
3.3
ANNUALLY (END OF EACH SEASON)
Perform all maintenance as described in the maintenance
schedule.
3.3.1.
Engine
Refer    to    engine    owner’s    manual    for   service
instructions.
3.3.2.
Spark Plug
Refer    to    engine    owner’s    manual    for   service
instructions.
FIGURE 3.1
3.4
STORAGE PROCEDURE
3.2.2
CHECK AUGER FLITE SHOE
Refer   to  the   Engine  Owner’s   Manual   for  directions
regarding engine storage preparations. Prepare the snow
thrower for “end of season” storage as follows:
1.
severed  or  exposed  belt  strands.  Replace  worn  flite
shoes before operating snow thrower. See Figure 3.2.
Visually  check  flite  shoes  for  cracking,  fraying
1.
Drain fuel from fuel tank and let engine run until
all fuel is out of the carburetor.
2.
away    from    spark   plug    before    any    other
preparations are made!
Disconnect  and  remove  the spark plug wire
3.
water into exhaust or air intakes during washing.
Tape  all  openings  closed  to   prevent  spraying
4.
thoroughly clean the underside of the auger.  
Tilt   snow    thrower   up    on   its    wheels   and
5.
of oil to prevent corrosion. DO NOT place any type
of lubrication onto belt or pulleys.
Lubricate all exposed metal with a light coating
6.
Store the machine in a shed or other dry area,
protected from weather.
CHECK AUGER
FLITE SHOE
FIGURE 3.2
10
Product Specification
CategoriesSimplicity Snow Blower Manuals, Snow Blower Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandSimplicity, Snow Blower
Document File TypePDF
Publishersimplicitymfg.com
Wikipedia's PageSimplicity Outdoor
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website