Section 2 - OPERATING INSTRUCTIONS
2.1
PRE-START CHECK LIST
Make the following checks and perform the service
required before each start-up.
STANDARD FLUID MEASUREMENT (32:1 Ratio)
2.1.1.
make sure all are in place and securely tightened.
Check guards, chutes, deflectors and covers to
GASOLINE
(Gallons)
0.25
2 CYCLE OIL
(Ounces)
1.00
2.1.2. Check auger control to insure it works freely.
See Figure 2.1.
0.50
2.00
0.75
3.00
AUGER
CONTROL
1.00
1.25
4.00
5.00
1.50
6.00
2.00
8.00
METRIC FLUID MEASUREMENT (32:1 Ratio)
GASOLINE
(Liters)
0.50
1.00
1.50
2 CYCLE OIL
(Cubic Centimeters)
15.63
31.26
46.88
ENGAGE AND
DISENGAGE AUGER
CONTROL TO INSURE
PROPER OPERATION
2.00
62.50
2.50
78.15
3.00
93.75
4.00
125.00
FIGURE 2.1
FIGURE 2.2
2.1.3.
insure smooth rotation throughout its range.
Check chute operation. Rotate chute to
(Continued on Next Page)
WARNING
Use approved fuel container. DO NOT smoke near
open fuel container. DO NOT fill fuel tank indoors or
when engine is running. Allow engine to cool for at
least ten minutes before refilling. Wipe off any
spilled fuel before starting engine. DO NOT run
engine indoors.
2.1.4.
Mix fresh, good quality unleaded gasoline and
SNAPPER 2-cycle engine oil or equivalent. Mix fuel
and oil to a 32:1 ratio. See Figure 2.2.
2.1.5.
Add premix fuel to tank after pushing the
machine outside where fumes can safely dissipate.
Make sure cap is tightened after refueling. Refer to
Engine Owners Manual for fuel specifications.
2.1.6.
Check auger housing, must be free of all
obstructions. Clean engine of any accumulation of
spilled fuel, dirt, etc.
5
Categories | Simplicity Snow Blower Manuals, Snow Blower Manuals |
---|---|
Tags | Simplicity 1694382, Simplicity 1694383, Simplicity 3190E, Simplicity 3190M |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | Simplicity, Snow Blower |
Document File Type | |
Publisher | simplicitymfg.com |
Wikipedia's Page | Simplicity Outdoor |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)