Adjustments
Lift Rod
See Figure 17. For initial setting, place front set collar
(A) one inch from rod guide with blade fully lowered.
Place rear set collar (B) against spring (C). Tighten
the setscrews in the two set collars.To adjust, perform
the following:
1.
Fully raise the blade by pulling back on the tractor
lift lever. Measure distance between scraper bar
and ground. If it measures approximately six inch-
es, it is properly adjusted. If not, proceed to step 2.
2.
Lower the blade. Loosen the setscrew in the front
set collar. move the set collar back to increase
ground clearance, forward to decrease ground
clearance. Tighten the setscrew. Recheck the
measurement.
Figure 17. Lift Rod Adjustment
A. Front Set Collar
B. Rear Set Collar
C. Spring
NOTE: Different ground contours may require differ-
ent adjustments. Moving the rear set collar toward
rear will allow the blade to follow a rolling contour.
Lower the blade to adjust the rear set collar. The far-
ther back the rear set collar is positioned, the more
the blade will float. Moving the rear set collar toward
the front will increase down pressure.
Skid Shoe Adjustment
Slotted holes are provided to permit adjustment of the
shoe assemblies for raising and lowering the blade to
various working heights (see Figure 18).
When cleaning snow from gravel or earth drives or
walks, the shoe assemblies should be lowered fully to
prevent blade contact with gravel or ground. When
cleaning smooth hard surfaces like concrete, the shoe
assemblies are normally placed fully up to allow the
blade to scrape the surface.
To adjust the skid, raise the blade off the ground and
block with a piece of wood. Loosen the bolts (B,
Figure 18) and move the skid shoes (A) up or down to
desired height. Tighten the bolts securely.
Figure 18.
A. Skid Shoes
B. Bolts
14
Categories | Agco Allis Snow Blower Manuals, Massey Ferguson Snow Blower Manuals, Simplicity Snow Blower Manuals, Snow Blower Manuals |
---|---|
Tags | Agco Allis 1600, Agco Allis 1691520, Agco Allis 1692039, Agco Allis 1692624, Agco Allis 1700, Agco Allis 2500, Agco Allis 2600, Agco Allis 2700, Agco Allis 42, Agco Allis 500, Massey Ferguson 1600, Massey Ferguson 1691520, Massey Ferguson 1692039, Massey Ferguson 1692624, Massey Ferguson 1700, Massey Ferguson 2500, Massey Ferguson 2600, Massey Ferguson 2700, Massey Ferguson 42, Massey Ferguson 500, Simplicity 1600, Simplicity 1691520, Simplicity 1692039, Simplicity 1692624, Simplicity 1700, Simplicity 2500, Simplicity 2600, Simplicity 2700, Simplicity 42, Simplicity 500 |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | Simplicity, Snow Blower |
Document File Type | |
Publisher | simplicitymfg.com |
Wikipedia's Page | Simplicity Outdoor |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)