If you are inexperienced with a chainsaw,
plunge-cutting should not be attempted.
Seek the help of a professional.
Gvivt
Limbing is removing the branches from
a fallen tree.
Xh
vt
First, cut a large, wide felling notch.
Make a plunge cut in the center of the
notch.
There is an extreme danger of kickback
during the limbing operation. Do not
work with the nose of the bar. Be extremely
cautious and avoid contacting the log or
other limbs with the nose of the guide bar.
The plunge cut is made with the guide
bar nose. Begin the plunge cut by
applying the lower portion of the guide
bar nose to the tree at an angle. Cut until
the depth of the kerf is about the same as
the width of the guide bar. Next, align
the saw in the direction in which the
recess is to be cut.
Do not stand on a log while limbing it –
you may slip or the log may roll.
Start limbing by leaving the lower limbs to
support the log off the ground. When
underbucking freely hanging limbs,
a pinch may result or the limb may fall,
causing loss of control. If a pinch occurs,
stop the engine and remove the saw,
by lifting the limb.
7pxvt
Bucking is cutting a log into sections.
Xh
vt
With the saw at full throttle, insert the
guide bar in the trunk.
1.
When bucking, do not stand on the
log. Make sure the log will not roll
downhill. If on a slope, stand on the
uphill side of the log.
Enlarge the plunge cut as shown in
illustration.
Xh
vt
There is an extreme danger of kickback
at this point. Extra caution must be taken
to maintain control of the saw. To make
the felling cut, follow the sectioning
method described previously.
Xh
vt
Be extremely cautious when cutting
limbs or logs under tension (spring poles).
The limbs or logs could spring back
toward the operator and cause loss of
control of the saw and severe or fatal
injury to the operator.
Watch out for rolling logs.
!!
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL 026 |
| Download File |
|
| Language | English |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)