STIHL 046 Chainsaw Owners Manual

CheckingChain Sprocketand Replacing
6
Release the rotor -
Replacing a broken rewind spring
Lubricate the new spring with
a few drops of non-resinous oil.
Remove the rope rotor -
Replace the chain sprocket
Let go of rope slowly so that
it winds onto the rotor.
after using two Oilomatic chains
The starter grip must locate firmly
in the rope guide bush.
or sooner if the wear marks on the
sprocket are deeper than approx.
0.5 mm (1/64") since this would reduce
the life of the chain.
see “Replacing Starter Rope” -
If the grip droops to one side:
Add one more turn on rope rotor
to increase spring tension.
When starter rope is fully extended
it must be possible to rotate the rotor
at least another half turn. If this is
not possible, the spring is over-
tensioned and could break.
Take one turn off the rope.
Fit the fan housing on the
crankcase.
Warning: The bits of spring in the fan
housing might still be under tension and
could fly apart when you take them out
of the housing. To reduce risk of injury,
wear eye and face protection and work
gloves.
Check wear marks:
Left:
on webs of rim sprockets
on teeth of spur sprockets.
Right:
You can use gauge* 0000 893 4101 to
check the depth of the wear marks on
spur and rim sprockets.
Use a screwdriver to carefully pry
the parts of the spring out of the
housing.
It is best to use two chains in rotation
with one sprocket.
Lubricate the new spring with
Set the Master Control lever to d
Push the remaining rope into
the starter grip so that the nipple (6)
is flush with the grip.
a few drops of non-resinous oil.
Place the new spring with retaining
Before removing chain sprocket
frame in position in the fan housing -
the anchor loop must engage the
lug.
Remove chain sprocket cover, chain
and guide bar.
Apply suitable tools (screwdriver,
Disengage the chain brake:
Pull hand guard toward front handle.
punch, etc.) to the recesses
(arrows) and push the spring into
its seat - it slips out of the retaining
frame in this process.
Reinstall the rope rotor, tension the
rewind spring, fit the fan housing
and secure in position.
*Special accessory
046
43
Product Specification
CategoriesChainsaw Manuals, STIHL Chainsaw Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 55 pages
LanguageEnglish
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website