English / USA
Starting / Stopping
the Engine
Gearbox
Lubrication
2
1
Starting
Use STIHL gear lubricant for brush-
cutters* for lubricating the gearbox.
:
Place the unit on a patch of clear
ground. It must rest securely on the
engine support and the deflector.
Check that the blades are not
touching the ground or any other
obstacles.
:
Check grease level regularly –
about every 50 hours of operation.
:
:
Unscrew the filler plug (1).
If no grease is visible on the inside
of the filler plug, screw the tube of
grease (2) into the filler hole.
:
:
Make sure you have a firm footing.
Press the unit firmly against the
ground with your left hand. Your
thumb should be under the housing.
:
:
Squeeze up to 1/5 oz (5 g) grease
into the gear housing.
Do not completely fill the gear
housing with grease.
Refit the filler plug and tighten it
down firmly.
Do not stand or kneel on the drive
tube!
The starting procedure is now as
described in the CombiEngine
instruction manual.
To shut down the engine:
Movearrow the(h slide) to STOPcontrol–in$direction of
*
see “Guide to Using this Manual”
BC-KM
15
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL BC, STIHL KM |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)