8urpxvtTh
xQyt
A
Wrong fuel mix (too much engine oil in
the gasoline), a dirty air filter and
unfavorable running conditions (mostly
at part throttle etc.) affect the condition of
the spark plug. These factors cause
deposits to form on the insulator nose
which may result in trouble in operation.
1
If engine is down on power, difficult to
start or runs poorly at idling speed,
first check the spark plug.
•
Fit a new spark plug after
approx. 100 operating hours -
or earlier if the electrodes are
badly eroded.
•
Remove spark plug -
see chapter “Starting”:
Clean dirty spark plug.
Check electrode gap -
•
•
Xh
vt/
it should be 0.5mm/0.02"6 -
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL (see “Specifications”). Always
press spark plug boot! snugly onto
spark plug terminal of the proper
size. (Note: If terminal has detachable
SAE adapter nut, it must be attached.)
A loose connection between spark plug
terminal and ignition wire connector in
the boot may create arcing that could
ignite combustible fumes and cause a
fire.
readjust if necessary.
Use only resistor type spark plugs
of the approved range.
•
Rectify problems which have caused
fouling of spark plug:
Incorrect carburetor setting, too much oil
in fuel mix, dirty air filter,
unfavorable running conditions, e.g.
operating at part load.
'
7S"!#
Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
---|---|
Tags | STIHL BR 320, STIHL BR 400 |
Download File |
|
Language | English |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3) Lawn and Garden readers have rated STIHL BR 320 400 Blower Vacuum Owners Manual 3.0 out of 3.0 based on 1 product reviews.
My handle control markings were not very durable