English / USA
Assembling the Blower
5
4
10
7
2
3
11
6
8
1
9
Mounting the Elbow
A combination wrench and carburetor
screwdriver are stowed on the underside
of the blower.
:
Secure the throttle cable (4) in
position with the retainer (5).
:
:
:
:
Push the nozzle (9) onto the blower
tube (8) and rotate it clockwise until
the bayonet coupling locks.
Rotate the pleated hose (7)
counterclockwise as far as stop and
leave it in that position.
Turn the control handle (10)
counterclockwise to the horizontal
position.
Rotate the complete blower tube
assembly until the nozzle discharge
opening points in the same direction
as the control handle.
Mounting the Blower Tubes
Operate the machine only with
both blower tubes properly
mounted.
The throttle cable is already
connected. Make sure it is not
kinked during assembly.
:
:
Push the blower tube (6) into the
:
Push the elbow (1) into the stub (2)
as far as it will go – the stops on the
elbow and stub must line up.
pleated hose (7).
Push blower tube (8) onto the end of
blower tube (6) and rotate it
clockwise until the bayonet coupling
locks.
:
:
Fit the nut (3) in the hexagon recess
in the stub.
Insert the screw in the nut from the
other side and tighten moderately –
the elbow must still turn freely.
Tighten down the clamp screw (11).
:
12
BR 380
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
|---|---|
| Tags | STIHL BR 380 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)