english / USA
Rewind Starter
Storing the Machine
Replacing the Depth Wheel /
Gearbox Wheel
To help prolong the wear life of the
starter rope, observe the following
points:
For periods of three months or more:
:
Drain and clean the machine in a
well ventilated place.
:
:
:
:
Pull the starter rope only in the
Run the engine until the carburetor
is dry – this helps to prevent the
carburetor diaphragms sticking
together.
:
direction specified.
1
Do not pull the rope over the edge of
the guide bush.
2
Do not pull out the rope more than
:
:
Remove, clean and inspect the
specified since it might break.
cutting blade.
Depth wheel
Do not let the starter grip snap back,
guide it slowly into the housing.
See also chapter “Starting /
Stopping the Engine”.
Thoroughly clean the machine,
paying special attention to the
cylinder fins and air filter!
Have worn wheel replaced by your
STIHL dealer.
:
Store the machine in a dry and safe
place, out of the reach of children
and other unauthorized users.
The end of the thread on screw (1) is
caulked to ensure that the wingnut (2)
does not work loose and be lost.
Replace a damaged starter rope in
good time or have it replaced by your
STIHL dealer.
A very high torque has to be applied
to remove the wingnut from the screw.
If the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by your
STIHL dealer.
FC 83
25
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 83 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)