English / USA
Storing the Machine
Replacing the Depth Wheel
Replacing the Skirt
For periods of about 3 months or longer
1
:
Drain and clean the fuel tank in a
well ventilated area.
3
2
:
Dispose of remaining fuel and
cleaning solution properly in
accordance with local
4
1
2
environmental requirements.
:
Run engine until carburetor is dry –
this helps prevent the carburetor
diaphragms sticking together.
Have worn depth wheel replaced by
your dealer. STIHL recommends that
maintenance and repair work be carried
out only by authorized STIHL dealers.
Removing the skirt
:
:
Remove, clean and inspect the
cutting blade.
:
Release and remove screw (1)
along with washer (2).
Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
:
Pull the skirt (3) off the lug (4) and
:
The end of the thread on screw (1)
is caulked to ensure that the
wingnut (2) does not work loose
and be lost.
out of the deflector
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case the screw
and wingnut should be replaced by your
dealer.
5
3
Position of skirt
:
Position the skirt (3) correctly in
relation to depth wheel (5):
If wheel is on left, the skirt must
project to the right.
FC 90
31
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 90 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)