STIHL FCB KM Curved Edger Owners Manual

English / USA
Storing the Machine
Replacing the Depth Wheel
Replacing the Skirt
For periods of about 3 months or longer:
1
:
Remove, clean and inspect the
blad.
3
2
:
If the KombiTool is stored
separately, fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
4
1
2
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Have worn depth wheel replaced by
your dealer. STIHL recommends that
maintenance and repair work be carried
out only by authorized STIHL dealers.
Removing the skirt
:
Release and remove screw (1)
along with washer (2).
:
Pull the skirt (3) off the lug (4) and
:
The end of the thread on screw (1)
is caulked to ensure that the
wingnut (2)  does not work loose
and be lost.
out of the deflector
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case the screw
and wingnut should be replaced by your
dealer.
5
3
Position of skirt
:
Position the skirt (3) correctly in
relation to depth wheel (5):
If wheel is on left, the skirt must
project to the right.
FCB-KM
17
Product Specification
CategoriesSTIHL Straight Edger Manuals, Straight Edger Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 46 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website